462455
20
Zoom out
Zoom in
Previous page
1/24
Next page
68
MG124CX/MG124C Owner’s Manual
Specifications
Reference
Input Specifications
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum
level. (All faders and level controls are at their maximum position.)
Output Specifications
Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms
* The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C)
Input Connectors
Gain
Input
Impedance
Appropriate
Impedance
Sensitivity * Nominal Level
Max. before Clip-
ping
Connector Specifica-
tions
CH INPUT MIC
(CHs 1-4)
–60 dB
3k
50–600
Mics
–80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV)
XLR-3-31 type (bal-
anced [1 = GND, 2
= HOT, 3 = COLD])
–16 dB
–36 dBu (12.3 mV) –16 dBu (123 mV) +4 dBu (1.23 V)
CH INPUT LINE
(CHs 1-4)
–34 dB
10k
600
Lines
–54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV)
TRS phone jack
(balanced [Tip =
HOT, Ring = COLD,
Sleeve = GND])
+10 dB
–10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V)
ST CH MIC
INPUT
(CHs 5/6, 7/8)
–60 dB
3k
50–600
Mics
–80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV)
XLR-3-31 type (bal-
anced [1 = GND, 2
= HOT, 3 = COLD])
–16 dB
–36 dBu (12.3 mV) –16 dBu (123 mV) –6 dBu (389 mV)
ST CH LINE
INPUT
(CHs 5/6, 7/8)
–34 dB
10k
600
Lines
–54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV)
Phone jack
(unbalanced)
+10 dB
–10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V)
ST CH INPUT
(CHs 9/10, 11/12)
10k
600
Lines
–30 dBu (24.5 mV) –10 dBu (245 mV) +10 dBu (2.45 V)
Phone jack (unbal-
anced)
RCA pin jack
CH INSERT IN
(CHs 1-4)
10k
600
Lines
–20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V)
TRS phone Jack
(unbalanced [Tip =
Out, Ring = In,
Sleeve = GND])
RETURN (L, R) 10k
600
Lines
–12 dBu (195 mV) +4 dBu (1.23 V) +24 dBu (12.3 V)
Phone jack
(unbalanced)
2TR IN (L, R) 10k
600
Lines
–26 dBV (50.1 mV) –10dBV (0.316V) +10dBV (3.16 V)
RCA pin jack
Output Connectors
Output
Impedance
Appropriate
Impedance
Nominal Level
Max. before
clipping
Connector Specifications
STEREO OUT (L, R) 75 600 Lines +4dBu (1.23 V) +24 dBu (12.3 V)
XLR-3-32 type (balanced [1 = GND, 2
= HOT, 3 = COLD])
Phone Jack (balanced [Tip = HOT,
Ring = COLD, Sleeve = GND])
GROUP OUT (1, 2) 150 10k Lines +4dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
EFFECT/AUX
(AUX1, 2*) SEND
150 10k Lines +4dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
CH INSERT OUT
(CHs 1-4)
75 10k Lines 0 dBu (0.775 V) +20 dBu (7.75 V)
Phone jack (unbalanced [Tip = Out,
Ring = In, Sleeve = GND])
REC OUT (L, R) 600 10k Lines –10 dBV (0.316 V) +10 dBV (3.16 V) RCA pin jack
MONITOR OUT (L, R)
150 10k Lines +4 dBu (1.23 V) +20 dBu (7.75 V)
Phone jack (impedance balanced [Tip
= HOT, Ring = COLD, Sleeve = GND])
PHONES OUT 100 40 Phones 3 mW 75 mW Stereo phone jack
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MG124C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG124C in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info