462455
18
Zoom out
Zoom in
Previous page
1/24
Next page
Reference
18
MG124CX/MG124C Owner’s Manual
Troubleshooting
* The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C).
Power doesn’t come
on.
Is the supplied power adaptor properly plugged into an appropriate AC
wall outlet?
Is the supplied power adaptor properly plugged into the mixer?
No sound.
Are microphones, external devices, and speakers connected correctly?
Are the ON switch and ST switch of the channels you are using turned
ON?
Are the channel GAIN controls, Channel fader, STEREO OUT master
fader and GROUP 1-2 fader set to appropriate levels?
Are the MONITOR switch and 2TR IN switch set properly?
Are your speaker cables connected properly, or are they shorted?
If the above checks do not identify the problem, call Yamaha for service.
(Refer to the page 71 for a list of service centers.)
Sound is faint, dis-
torted, or noisy.
Are the channel GAIN controls, Channel fader, STEREO OUT master
fader and GROUP 1-2 fader set to appropriate levels?
Are two different instruments connected to the XLR-type and phone jacks,
or to the phone and RCA pin jacks on one channel? Please connect to
only one of these jacks on each channel.
Is the input signal from the connected device set to an appropriate level?
Are you applying the effects at an appropriate level?
Are microphones connected to the MIC input jacks on channels 1 to 7/8?
If you are using condenser microphones, is the PHANTOM +48 V switch
turned ON?
No effect is applied.
(If you are using
MG124CX)
Check that the EFFECT control on each channel is correctly adjusted.
Be sure that the internal effect unit’s ON switch is turned ON.
Be sure that the EFFECT PARAMETER control and EFFECT RTN fader
are correctly adjusted.
I want spoken words
to be heard more
clearly.
Be sure that the switches are ON.
Adjust the equalizers (HIGH, MID and LOW) on each channel.
I want to output a
monitor signal
through speakers.
Connect a powered speaker to the AUX (AUX1) jack* and turn the PRE
switch on each channel ON. Then adjust the output signal by using the
AUX (AUX1) controls on each channel and the Master SEND control.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MG124C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG124C in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info