557717

Yamaha MDX-E300 Manual

21
Zoom out
Zoom in
Previous page
1/184
Next page
19
English
English
EDITING
Disc or track title erase
This operation lets you erase the title of the disc or the
title of tracks on a disc. The title of the disc can only be
erased during the stop mode, however, the title of the
track can be erased during play or stop mode.
To erase a disc title
1 Press & to set this unit to stop mode.
2 Press EDIT repeatedly to display “Title Erase?”, then
press SET/ENTER.
•“Disc Title” and “Erase OK?” appear alternatively
in the display.
3 Press SET/ENTER again.
• The disc title is erased and “Complete” appears
momentarily.
To erase a track title
1 Use $ or › to select the track with the title you
want to erase.
2 Press EDIT repeatedly to display “Title Erase?”, then
press SET/ENTER.
•“Track Title” and “Erase OK?” appear
alternatively in the display.
3 Press SET/ENTER again.
• The track title is erased and “Complete” appears
momentarily.
Notes
• Note that the DISC and TRACK indicators appear in the
display when “Title Erase” is displayed to distinguish between
the two operations.
• To avoid mistakes when erasing the disc or track names, press
DISPLAY repeatedly until the title display screen appears so
that titles can be confirmed beforehand.
Move
This function lets you change the position of any track.
When you move tracks, all tracks are automatically
renumbered.
Example: Moving track 2 to track number 4
1 Use $ or › to select the track you want to move.
Before
moving
After
moving
Before
combining
After
combining
Selected track
Destination
12
AB DEC
3456
12
AC BED
3456
ANALOG
DIGITAL
OPT.123
COAX.
32 44.1 48
kHz
REPEAT
MONO
REC
MANUAL
TOC
DISC TRACK
TOTAL
REMAIN
RANDOM
PROGRAM
A-B S F
L
R
dB
–
60 30 10 6 4 2 1 0 OVER00
–– – –––
12
AB DEC
3456
12
A B+C D E
345
2 Press EDIT repeatedly to display “Move ?”, then
press SET/ENTER.
3 Use $ or › to select the track’s destination (new
track number).
4 Press SET/ENTER.
•“Complete” appears momentarily in the display.
Combine
This function lets you combine two consecutive tracks
into one. After you combine the tracks, the total number
of tracks decreases by one and the tracks following the
combined tracks are renumbered.
Example: Combining tracks 2 and 3
1 Press & to stop playback.
2 Use $ or › to select the second track of the two
you want to combine.
3 Press EDIT repeatedly to display “Combine ?”, then
press SET/ENTER.
•“Check” appears momentarily, then the MD
recorder plays the 4 seconds before and after the
point where the tracks will be connected. “(track
number) + (track number) OK?” appears in the
display.
4 Press SET/ENTER again.
• The tracks are combined and “Complete” appears
momentarily.
Note
• A track recorded in MDLP mode cannot be combined with a
track recorded in the non-MDLP mode. (“Impossible” appears
in the display.)
0106MDXE300(M).17-20.E 02.5.17, 10:54 AM19
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MDX-E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MDX-E300 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info