557717
20
Zoom out
Zoom in
Previous page
1/184
Next page
18
Erase
EDITING
Erase
The ability to erase sound without having to re-record is a
convenient function of MD. You can erase the entire disc,
a single track, or just part of a track.
Disc erase
This operation lets you erase all audio and title (character)
data to create a blank MD. Please note that once erased,
this data can be recovered using the UNDO function.
1 Press & to set this unit to stop mode.
2 Press EDIT repeatedly to display Disc Erase?, then
press SET/ENTER.
•“DiscEraseOK? appears in the display.
3 Press SET/ENTER again.
When all audio, name and title data has been
erased Complete appears momentarily.
Track erase
This operation lets you erase a single track as well as
corresponding title data. After you erase the track, the
total number of tracks decreases by one and all tracks
following that track are renumbered.
Example: Erasing track 3
1 Use $ or to select the track you want to erase.
2 Press EDIT repeatedly to display Erase ?, then
press SET/ENTER.
•“(track number) Erase OK? appears in the
display.
3 Press SET/ENTER again.
The track is erased and Complete appears
momentarily.
If you plan to erase two or more tracks
To avoid confusion you should always erase from higher
track numbers to lower track numbers. This prevents
accidental renumbering of tracks you plan to erase.
Before
erasing
After
erasing
Part erase
This operation lets you erase part of a track.
1 Play the track containing the part you want to erase.
2 Use ! or to locate the beginning of the part
you want to erase (point A), then press * to pause at
that point.
3 Press EDIT repeatedly to display AB Erase?, then
press SET/ENTER.
Point A (from step 2) is registered and Erase
A_ appears in the display.
4 Use # and to locate the end of the part you want
to erase (point B).
5 Press SET/ENTER to register point B.
•“Check appears, then the part you specified plays
repeatedly and Erase AB? appears in the
display.
To adjust points A and B
Press EDIT repeatedly to display A point and B point
alternately. Adjust the selected point by using $ or
in the direction you want to move the point.
Each point can be adjusted up to 2 seconds in either
direction.
6 Press SET/ENTER again.
The part is erased and Complete appears
momentarily.
Notes
After part erase, a new track number is automatically assigned
to the section starting after point B.
Point B cannot be positioned before point A.
Before
erasing
After
erasing
12
AB DEC
3456
12
AB EFD
3456
1
ACB
23
12
A1 A2 CB
34
0106MDXE300(M).17-20.E 02.5.17, 10:54 AM18
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MDX-E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MDX-E300 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info