157308
69
Zoom out
Zoom in
Previous page
1/75
Next page
Troubleshooting
70
Problem
The MusicCAST client
does not play back
some songs
displayed in the song
selection menus.
You cannot select an
external input from
the MusicCAST client.
Playback from an
external component
cuts off for no reason.
None of the controls
other than the volume
control have any
effect on the
MusicCAST client.
Starting playback on
the MusicCAST client
produces interference
noise on nearly
radios.
The MusicCAST client
does not output any
sound when you
search forward or
backward through a
track.
The message Error:
Amp Protection
Active appears on
the on-screen display
of MusicCAST client.
The side panel cover
does not reattach
correctly.
Playback on the
MusicCAST client
skips or pauses.
There is a significant
pause between
playback of songs on
the MusicCAST client.
Cause
You have not registered songs recorded
from an external component to the library.
The MusicCAST server is recording from
an external source.
The MusicCAST server is receiving signal
change requests from another source.
The MusicCAST server is locking the
MusicCAST client.
The MusicCAST client and the radio are
too close to each other.
This is normal when searching through a
track.
The cables are not connected correctly.
You are using low-impedance speakers.
You are using audio or video cables other
than those supplied to connect the
MusicCAST client to an amplifier or TV/
monitor.
The rubber covering of the LAN cable is
blocking the panel cover.
You are using close to the maximum
number of MusicCAST clients and
simultaneously playing, storing, or editing
on the MusicCAST server.
This is normal when listening with the
MusicCAST client.
Remedy
Wait until the MusicCAST server completes
encoding songs to MP3.
Wait until the MusicCAST server finishes recording.
Stop the signal request changes from other
MusicCAST clients.
Use the MusicCAST server to remove the lock.
Place the MusicCAST client and the radio at least
one meter apart.
Continue to use this function in the same manner.
Connect the cables correctly.
Please use speakers with an impedance of at least 4
ohms.
The panel cannot close unless you use the audio or
video cable with the L shaped jacks supplied with the
MusicCAST client.
Remove the rubber covering from the LAN cable.
Reduce the number of MusicCAST clients to which
the MusicCAST server is distributing music, or stop
any operation you are performing on the MusicCAST
server.
Refer to
page
MCX-
1000
owners
manual,
page 121
MCX-
1000
owners
manual,
page 21
48
MCX-
1000
owners
manual,
page 92
23
11
23, 24
105_Musiccast_E.p65 2003.06.28, 19:0370
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha mcx-a10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha mcx-a10 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info