554951
9
Zoom out
Zoom in
Previous page
1/46
Next page
E-1
English
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Choose the installation location of this system carefully.
Avoid placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away from
sources of hum such as transformers and electric motors.
Do not operate this system upside-down. It may overheat,
possibly causing damage.
Never open the cabinet. If something drops into the set,
contact your dealer.
The openings on the main unit cover assure proper
ventilation of the main unit. If these openings are
obstructed, the temperature inside the unit will rise rapidly.
Therefore, avoid placing objects against these openings,
and install the main unit in a well-ventilated area to
prevent fire and damage.
Always set the VOLUME control to minimum before
starting an audio source play: increase the volume
gradually to an appropriate level after play has started.
When not planning to use this system for long periods of
time (ie., vacation, etc.), disconnect the AC power plug
from the wall outlet.
Grounding or polarization – Precautions should be taken
so that the grounding or polarization of this system is not
defeated.
Do not use force on switches, controls or connection
wires. When moving the main unit, first disconnect the
power plug and the wires connected to other equipment.
Never pull the wire itself.
If an external appliance (TV, radio, etc.) interferes with this
system operation, move the main unit away from such an
appliance.
Do not attempt to clean this system with chemical
solvents; this might damage the finish. Use a clean, dry
cloth.
Be sure to read the “Troubleshooting” section regarding
common operating errors before concluding that this
system is faulty.
To prevent lightning damage, disconnect the AC power
plug and the antenna cable when there is an electrical
storm.
Do not plug the AC power plug to the wall socket before
you finish all connections.
Never allow metallic items (e.g. screwdrivers, tools, etc.) to
come near the tape deck’s record/playback head
assembly. Doing so may not only scratch or damage the
head’s mirror-smooth finish, it may change the magnetic
characteristics of the heads, causing a deterioration in
reproduction performance quality.
Although the tape deck’s record/playback heads are high
quality heads with outstanding reproduction
characteristics, they can become dirty through the use of
old tapes or from dust accumulation over time. This can
have a serious effect on reproduction quality. Clean the
heads regularly with one of the commonly available head
cleaners or with cleaning solutions.
The voltage to be used must be the same as that specified
on this system. Using this system with a higher voltage
than specified is dangerous and may result in a fire or
other types of accidents causing damage. YAMAHA will
not be held responsible for any damage resulting from use
of this system with a voltage other than specified.
The sound level at a given volume setting depends on
speaker location and other factors. Care should be taken
to avoid exposure to sudden high levels of sound, which
may occur when turning on this system with the volume
control setting at high, and to continuous high levels of
sound.
Sudden temperature changes and storage or operation in
an extremely humid environment may cause condensation
inside the cabinet. Condensation can cause this system to
malfunction.
To eliminate condensation:
CD pickup
Leave the power on with no disc loaded until normal
play becomes possible (about 1 hour).
Tape head
Leave the power on with no tape loaded until normal
playback becomes possible (about 1 hour).
Note
If condensation forms on the tape head, dirt or dust
may accumulate during use.
Remote control
Wipe off condensation on the transmission window
with a soft cloth before operating this system.
To prevent a malfunction of this system:
Do not use any non standard shaped disc (heart etc.)
available on the market, because it may damage this
system.
Do not use a disc with tape, seals, or paste on it,
because damage to this system may result.
Precautions: Read this before operating your system
This system is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
this system itself is turned off. This state is called the
standby mode.
In this state, this system is designed to consume a certain
level of power.
Note
Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright material may infringe copyright laws.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha GX-500RDS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha GX-500RDS in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info