425043

Yamaha emx212s 8 kanaals powermixer Manual

21
Zoom out
Zoom in
Previous page
1/36
Next page
Controls and Connectors
EMX512SC/EMX312SC/EMX212S
21
6 COMP knob (EMX512SC and EMX312SC only)
This knob adjusts the level of compression applied to the
channel. As the knob is turned to the right, the mixer
automatically raises the compression ratio while adjust-
ing the output gain accordingly. The result is a narrower,
more even dynamic range, as louder signals are softened
while the overall level is boosted. Avoid setting the knob
too high, however, as excess compression may lead to
howling.
7 LINE/MIC switch (Channels 1 to 4)
Set this switch to match the type of input signal you are
supplying—either a mic-level (low level) signal or a
line-level (high level) signal. Set the switch to LINE
() if you are connecting a line-level source, such as a
keyboard or audio device. Set it to MIC ( ) if you are
connecting up a microphone or other mic-level source.
To avoid damage to speakers, be sure to turn off the
power to the EMX itself and to any other power ampli-
fiers and power speakers before setting this switch to
LINE or MIC. We also recommend that you turn all
output controls (LEVEL knobs, MASTER knobs, etc.)
to minimum settings before operating the switch, to
avoid risk of loud noises that could cause hearing loss
or device damage.
8 INPUT A and INPUT B jacks (Channels 1 to 4)
You can connect an input source to either jack. Be sure
to set the LINE/MIC switch 7 to match the type of
device you are connecting.
INPUT A: TRS phone-type balanced line input (T:
hot, R: cold, S: ground). Accepts both bal-
anced and unbalanced line input.
INPUT B: XLR balanced mic input (1: ground, 2:
hot, 3: cold). If you are connecting a con-
denser microphone, be sure to turn the
PHANTOM switch P to its ON position.
•You cannot use both jacks at the same time.
• The signal into an INPUT jack is sent in equal lev-
els to the MAIN L and MAIN R buses.
9 LINE and MIC jacks (Channels 5/6 to 11/12)
These jacks accept stereo inputs. Use these to connect up
stereo output devices, such as stereo synthesizers and
CD players.
LINE jacks: Unbalanced stereo inputs. On channel
pairs 5/6 and 7/8 these are phone jacks; on
channel pairs 9/10 and 11/12 they are
RCA pin jacks.
MIC jack: XLR balanced stereo mic-level input jack.
If you are connecting a condenser micro-
phone, be sure to turn the PHANTOM
switch P to its ON position.
• If you wish, you may use the channel pair’s LINE
and MIC jacks together at the same time. But note
that the levels cannot be adjusted independently.
• Signals into LINE L and LINE R jacks are sent
independently to the corresponding MAIN L and R
buses.
• The signal into a MIC jack is sent in equal levels to
the MAIN L and MAIN R buses.
R: Cold (–)
S: Ground T: Hot (+)
Cold (–)
Ground Hot (+)
NOTE
NOTE
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha emx212s 8 kanaals powermixer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha emx212s 8 kanaals powermixer in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info