588810
45
Zoom out
Zoom in
Previous page
1/66
Next page
STEP 8:
STEP 9:
STEP 10:
STEP 11:
STEP 12:
Set OP3 (carrier) EG
Before we actually set the OP3 EG parameters, select OP3 using the OPERATOR
SELECT button, call the OPERATOR OUTPUT LEVEL parameter and set it to 99.
Now enter the following EG parameters:
AR = 31
DIR = 13
D1L = 0
D2R = 0
RR = 10
Copy OP3 (carrier) EG Parameters to OP4 (modulator)
Hold down the EG COPY button and press the OPERATOR/AMS ON-OFF 4 button.
Raise OP4 (modulator) Output Level
Select OP4, select the OPERATOR OUTPUT LEVEL parameter and set it to 71.
Set OP4 Frequency Ratio
To get a metallic attack “ping,” we’ll set the OP4 output level frequence ratio to
7.00. With OP4 selected, press the OSCILLATOR FREQ RATIO button and set to
7.00.
Play a note and listen to the attack sound.
Combine all Operators and Balance Levels
Turn OP1 and OP2 back on so we can here the combined sound of the two operator
stacks. Play a note. At this point the attack sound is far too loud, so we’ll reduce
the output level of OP3 to achieve a better balance.
Select OP3, press the OPERATOR OUTPUT LEVEL button and set to 70.
Play a note—our piano voice is improving.
STEP 13:
Set Feedback Level
We can enhance the attack sound of the voice by adding just a touch of “bite”
using feedback. Select the FEEDBACK parameter and set to 5.
43
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DX27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DX27 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DX27

Yamaha DX27 User Manual - English - 19 pages

Yamaha DX27 User Manual - German - 19 pages

Yamaha DX27 User Manual - German - 66 pages

Yamaha DX27 User Manual - French - 19 pages

Yamaha DX27 User Manual - French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info