588810
44
Zoom out
Zoom in
Previous page
1/66
Next page
Since the voice has been initialized, the output level of operator 1 will be set at
90 and that of operator 2 will be 0, so at the moment we only hear the sound from
operator 1.
STEP 4:
Set the OP1 (carrier) EG
Select the ENVELOPE GENERATOR AR parameter, and select operator 1 by pressing
the OPERATOR SELECT button.
We want an instantaneous attack, so AR should be set at 31. Select the D1R
parameter and set to 10 for a relatively slow initial decay.
Select the D1L parameter and set to 10.
Select the D2R parameter and set to 8.
Select the RR parameter and set to 8.
Now play a note and listen to the volume envelope we’ve created. This is the basic
form of the electric piano voice.
STEP 5:
Copy OP1 (carrier) EG Parameters to OP2 (modulator)
Hold down the EG COPY button and press the OPERATOR/AMS ON-OFF 2 button.
The EG parameters you just set for operator 1 have now been copied to operator
2. You can check this by selecting operator 2 (press OPERATOR SELECT) and
looking at the EG parameters (AR—RR).
STEP 6:
Set OP1 and OP2 Output Levels
In this step we’ll create the basic timbre of our piano voice.
First, select OP1, select the OPERATOR OUTPUT LEVEL parameter and set it to
99.
Next, select OP2 and set its output level to 66.
Play a key and note that we no longer have a simple sine wave. By increasing the
output level of OP2 we are modulating the carrier, OP1, thereby creating a more
complex waveform. In this case the frequency ratios of OP1 and OP2 are left at
their initialized values of 1.00, since this is the basic timbre we want for this voice.
STEP 7.
Turn OFF OP1 and OP2, Turn ON OP3 and OP4
Now that we’ve created the basis for our piano voice, turn OP1 and OP2 OFF so
we can concentrate on creating the attack sound using the remaining operator stack
(OP3 and OP4). Now turn OP3 and OP4 ON.
42
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DX27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DX27 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DX27

Yamaha DX27 User Manual - English - 19 pages

Yamaha DX27 User Manual - German - 19 pages

Yamaha DX27 User Manual - German - 66 pages

Yamaha DX27 User Manual - French - 19 pages

Yamaha DX27 User Manual - French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info