516900
84
Zoom out
Zoom in
Previous page
1/154
Next page
84 En
Graphical user interface (GUI) menu
When “Mode” is set to “Last” or “Fix”, the amount of power
consumption in the standby mode increases.
Input (HDMI IN jack select)
Use this feature to select an HDMI IN jack that accepts
HDMI signals when this unit is in the standby mode.
This setting is available only when “Mode” is set to “Fix”.
Output (HDMI OUT jack select)
Use this feature to select HDMI OUT jack(s) that output
HDMI signals when this unit is in the standby mode.
This setting is available only when “Mode” is set to “Fix”.
Audio Output (HDMI audio output)
Use this feature to select whether to play back HDMI
audio signals on this unit or on another HDMI component
connected to the HDMI OUT jacks on the rear panel of
this unit.
y
If “Audio Output” is set to “TV” or “Amp + TV”, available
audio signals vary depending on the specification of the
connected video monitor.
Control Monitor (Control monitor)
Use this feature to select the HDMI OUT jack at which
HDMI control signals are output.
Monitor Info. (Monitor information)
Use this feature to check the information (interface and
frequency for each video resolution) about the video
monitors connected to the HDMI OUT 1 and HDMI
OUT 2 jacks of this unit.
y
Press 9h repeatedly to toggle between “OUT1” (information
about the video monitor connected to the HDMI OUT 1 jack)
and “OUT2” (information about the video monitor connected to
the HDMI OUT 2 jack).
Use this menu to adjust the network parameters.
In case you changed your network configuration, you may
need to reconfigure the network settings.
y
You can reset the all parameters in “Network” to the initial
factory settings by using “NETWORK” of “INITIALIZE” in
ADVANCED SETUP” (page 114).
Configuration (Network configurations)
Use this feature to view the network parameters (IP
address, etc.) or to change them manually.
DHCP (DHCP setting)
Use this feature to select whether this unit can obtain the
network parameters (IP address, subnet mask, default
gateway, primary DNS server and secondary DNS server)
from the DHCP server of the connected network.
IP Address (IP address)
Use this parameter to specify an IP address assigned to
this unit. This value must not duplicate the one used for
other devices in the target network.
Fix
HDMI signals pass through this unit (from the
HDMI IN jack specified in “Input” to the HDMI
OUT jack(s) specified in “Output”) even when
this unit is in the standby mode.
Note
Note
Choice HDMI IN jack
IN1
HDMI IN1 (BD/HD DVD) jack
IN2
HDMI IN2 (DVD) jack
IN3
HDMI IN3 (CBL/SAT) jack
IN4
HDMI IN4 (DVR) jack
Front
HDMI IN (VIDEO AUX) jack
Note
Choice HDMI IN jack
OUT1 + 2
HDMI OUT 1 and HDMI OUT 2 jacks
OUT1
HDMI OUT 1 jack
OUT2
HDMI OUT 2 jack
Choice Functions
Amp
Outputs HDMI audio signals at the speakers
connected to this unit.
TV
Outputs HDMI audio signals at the speakers of
the TV connected to this unit. The speakers
connected to this unit are muted.
Amp + TV
Outputs HDMI audio signals at the speakers
connected to this unit and speakers of the TV
connected to this unit.
Choice Functions
Choice Functions
HDMI OUT1
Outputs HDMI control signals at the HDMI
OUT 1 jack.
HDMI OUT2
Outputs HDMI control signals at the HDMI
OUT 2 jack.
Setup (Network)
Note
Choice Descriptions
On
Select this setting when this unit can obtain the
network parameters from the DHCP server of
the connected network.
Off
Select this setting when you set the network
parameters manually.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z7 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z7

Yamaha DSP-Z7 User Manual - German - 154 pages

Yamaha DSP-Z7 User Manual - Dutch - 154 pages

Yamaha DSP-Z7 User Manual - French - 155 pages

Yamaha DSP-Z7 User Manual - Italian - 155 pages

Yamaha DSP-Z7 User Manual - Swedish - 154 pages

Yamaha DSP-Z7 User Manual - Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info