516900
83
Zoom out
Zoom in
Previous page
1/154
Next page
83 En
Graphical user interface (GUI) menu
ADVANCED
OPERATION
1 Press
9
k / n repeatedly to select
“Adjustment” and then press
9
ENTER.
2 Press
9
l / h repeatedly to select a preset
number to which you want to save the video
quality adjustments and then press
9
ENTER.
y
To recall the preset video quality adjustments, press 9l /
h to select a preset number to recall, press 9ENTER
and then skip to step 8.
3
Press
9
n
to select “EDIT” and then press
9
ENTER
.
4
Press
9
l / h
repeatedly to select the video
quality parameter you want to adjust and then
press
9
n
to move to the adjustment field.
5 Press
9
l / h repeatedly to adjust the
setting of the selected video quality
parameter.
6
To adjust another video quality parameter,
press
9
k / n
repeatedly to select the
parameter field and then repeat steps 4 and 5.
7 Press
9
n to select “OK” and then press
9
ENTER.
y
To cancel the operation without change, press 9l / h
to select “CANCEL” and then press 9ENTER.
8 Press
9
k / n / l / h to select “CLOSE” and
then press
9
ENTER.
Mosquito NR (Mosquito noise reduction)
Mosquito noise is a type of noise that appears along
edges of compression artifacts. Use this feature to
adjust the mosquito noise reduction level.
Choices: Off, Low, Medium, High
Block NR (Block noise reduction)
Block noise is often caused when the bitrate is too
low to accurately encode the video. Use this feature
to adjust the block noise reduction level.
Control range: 0 to 50
Detail Enhancement (Detail enhancement)
Use this feature to adjust finesses of images.
Control range: 0 to 50
Edge Enhancement (Edge enhancement)
Use this feature to adjust sharpness of images.
Control range: 0 to 50
Brightness (Brightness)
Use this feature to adjust brightness of images.
Control range: –50 to 50
Initial setting: 0
Contrast (Contrast)
Use this feature to adjust contrast of images.
Control range: –50 to 50
Initial setting: 0
Saturation (Saturation)
Use this feature to adjust saturation of images.
Control range: –50 to 50
Initial setting: 0
Use this feature to set the HDMI functions or check the
information about the video monitors connected to the
HDMI OUT jacks.
Standby Through (Standby through)
Mode (Standby through mode)
Use this feature whether this unit allows the HDMI signals
input at the HDMI IN jacks to pass thorough this unit
when this unit is in the standby mode. You can also
designate an HDMI IN jack and HDMI OUT jack(s) that
accept the signals when “Mode” is set to “Fix” and this
unit is in the standby mode.
Preset Select
123456
EDIT CLOSE
1 Mosquito NR
Off
OK CANCEL
Video quality parameter
Adjustment
Setup (HDMI)
Choice Functions
Off
Disables the HDMI standby through feature.
HDMI signals do not pass through this unit if
this unit is in the standby mode.
Last
HDMI signals pass through this unit (only from
the HDMI IN jack to the HDMI OUT jack(s)
used when this unit is set to the standby mode)
even when this unit is in the standby mode.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha DSP-Z7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha DSP-Z7 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha DSP-Z7

Yamaha DSP-Z7 User Manual - German - 154 pages

Yamaha DSP-Z7 User Manual - Dutch - 154 pages

Yamaha DSP-Z7 User Manual - French - 155 pages

Yamaha DSP-Z7 User Manual - Italian - 155 pages

Yamaha DSP-Z7 User Manual - Swedish - 154 pages

Yamaha DSP-Z7 User Manual - Spanish - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info