48734
147
Zoom out
Zoom in
Previous page
1/196
Next page
147
Menu Display
You will see the following if you use the [PAGE]
knob while holding down the [SHIFT] key. Use the
[PAGE] knob to move the cursor to the parameter
you wish to edit, then release the [SHIFT] key to
jump to the screen you were previously at.
For CS6x, you can directly make access to a specific
Menu screen using a PROGRAM/PART key (Page 80).
The í Indicator
If you alter any parameters in Phrase Clip Edit Mode,
the í indicator will be displayed at the top left of the
screen. This gives a quick indication that the current
Clip Kit has been modified but not yet stored.
Even if you exit to Phrase Clip Play Mode, the edited
settings for the current Clip Kit will not be lost so
long as you do not select another Clip Kit.
The í indicator will also be displayed in Phrase Clip
Play Mode.
The “Compare” Function
Use this to listen to the difference between the Phrase
Clip with your edited settings and the Phrase Clip
prior to editing.
1 Press the [COMPARE (EDIT)] key while in Phrase
Clip Edit Mode. The í indicator at the top left of
the screen will change to the î indicator and the
Phrase Clip settings prior to editing will temporarily
be reinstated for comparison purposes.
While the “Compare” function is enabled, editing will
not be possible using Knobs [A] to [C] or Knob [1]/[2].
2 Press the [EDIT] key again to disable the
“Compare” function and restore the settings for
your edited Phrase Clip.
GENîName) Ctgry
Compare indicator
GEN Name) Ctgry
“Edit” indicator
OSC Out) Com:>GEN≥QED>ARP>CTL> >EFF
Key=C 3 Key:>OSC>PCH>FLT>AMP> >EQ
SHIFT PAGE
PART
/
ELEMENT
DATAA B C 1 2
Cursor
Clip Common General
GEN Name (General Name)
You can set a Clip Kit Name consisting of up to 10
characters. You can also select the Category Name to
the left of the Clip Kit Name.
The Clip Kit Name is set in the same way as the Voice
Name. Details are given on Page 80.
Clip Common Quick Edit
Various parameters control the sonic properties of the
Clip Kit, and many can be edited using the Sound
Control knobs on the front panel of the CS6x. There
are four screens.
QED Level (Quick Edit Level)
QED EffectCtrl (Quick Edit Effect)
QED Filter (Quick Edit Filter)
QED EG (Quick Edit Envelope Generator)
In Performance Mode, the Phrase Clip Part settings are used.
QED Level (Quick Edit Level)
These parameters control the output level and pan
position of the Clip Kit.
Vol (Volume)
Set the output level of the Clip Kit.
Settings: 0 ~ 127
Pan
Set the stereo pan position of the Clip Kit. You can
also adjust this parameter using the [PAN] knob on
the front panel of the CS6x.
Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
RevSend (Reverb Send)
Set the Send level of the signal sent from Insertion
Effect 1/2 (or the bypassed signal) to the Reverb effect.
You can also adjust this parameter using the [REVERB]
knob on the front panel of the CS6x.
Settings: 0 ~ 127
QEDíLevel) Vol Pan RevSend ChoSend
Common 127 C 127 127
GENíName) Ctgry a-Z 0-? Cursor
Common [Pf:Init Voice]
Category
Name
Clip Kit Name
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CS6R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CS6R in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CS6R

Yamaha CS6R User Manual - German - 196 pages

Yamaha CS6R User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info