516893
16
Zoom out
Zoom in
Previous page
1/68
Next page
Connecting Pedals
16 CP5/CP50 Owner’s Manual
Setting Up
Connecting Pedals
The FC3 foot pedal that comes with your CP5 or CP50 is connected via the [SUSTAIN] foot-switch jack located on the
rear panel. In order to intuitively control a range of different parameters, furthermore, an optional FC4 or FC5 foot switch
can also be connected via the [ASSIGNABLE] foot-switch jack, and optional FC7 or FC9 foot controllers can be
connected via the [1] and [2] foot-controller jacks (or in the case of the CP50, via the [FOOT CONTROLLER] jack). For
details on how to assign parameters to these foot switches and controllers, see the description concerning the Common
Settings screen. (See the Reference Manual pdf document for more details.)
NOTE The [SUSTAIN] foot-switch jack can also be used to connect an optional FC4 or FC5 foot switch.
Turning on the Stage Piano
1After you have made all of the required connections as described above with your CP5 or CP50 turned off or in
Standby (N) mode, ensure that the [MASTER VOLUME] dial on the left of the stage piano’s control panel and the
volume of any connected keyboard amplifiers or powered speakers are fully turned down.
2Press the P switch located on the rear panel.
3Turn on any keyboard amplifiers or powered speakers connected to the stage piano.
When turning off the stage piano or returning it to Standby mode, start by turning fully down the [MASTER VOLUME] dial
on the control panel and the volume of any connected keyboard amplifiers or powered speakers; then turn off the
amplifiers or speakers; and finally, press the P switch on the rear panel.
HINT
If the stage piano is turned on with a USB flash-memory device already plugged in, it will before displaying the Performance
screen — either create an External Performance memory (page 23) on that device or read External Performance data already
present on the device into DRAM. For more details, refer to the Reference Manual pdf document.
12
CP5
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP50 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP50

Yamaha CP50 User Manual - German - 68 pages

Yamaha CP50 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info