516893
14
Zoom out
Zoom in
Previous page
1/68
Next page
Connecting Power
14 CP5/CP50 Owner’s Manual
Setting Up
Setting Up
Connecting Power
CP5 Stage Piano:
1Ensure that the P (Power) switch on the rear panel is set to the Off position.
2Insert the appliance end of the bundled power cord into the [AC IN] socket, also on the rear panel.
3Plug the other end of the power cord into a domestic-use, AC wall socket.
NOTE Carry out this procedure in reverse order when disconnecting the power cord.
WARNING
Use only the AC power cord supplied with the CP5. The use of an inappropriate replacement can pose a fire and shock hazard!
CAUTION
Make sure your CP5 meets the voltage requirement for the country or region in which it is being used. The power cord includes a
grounding pin to prevent electrical shock and damage to equipment. When connecting to an outlet, connect the adaptors ground lead to
the ground screw. If you’re unsure how to connect, then contact your Yamaha dealer or service center.
CAUTION
Even when the switch is in the OFF position, a small amount of electricity is still flowing to the unit. When you are not using the CP5 for
a long time, make sure to unplug the AC power adaptor from the wall AC outlet.
CP50 Stage Piano:
Connect the power adaptor that came with your CP50 as described below. Before doing so, ensure that the P (Standby/
On) switch is set to the Standby position.
1Insert the power-adaptor plug into the DC IN connector on the CP50’s rear panel.
2Plug the power adaptor into a suitable AC wall socket.
NOTE Carry out this procedure in reverse order when disconnecting the power adaptor.
WARNING
Use the specified adaptor (page 62) only on the CP50. Using the wrong adaptor can result in damage to the instrument or overheating.
WARNING
Make sure your CP50 is rated for the AC voltage supplied in the area in which it is to be used (as listed on the rear panel). Connecting the
unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard!
CAUTION
Even when the Standby/On switch is in the “Standby” position, electricity is still flowing to the instrument at the minimum level. When
you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
[AC IN] socket
DC IN connector
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP50 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP50

Yamaha CP50 User Manual - German - 68 pages

Yamaha CP50 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info