588662
40
Zoom out
Zoom in
Previous page
1/64
Next page
Detailed Settings
CP33 Owner’s Manual
40
Reference
Program Change ON/OFF
Normally the CP33 will respond to MIDI program change
numbers received from an external keyboard or other
MIDI device, causing the correspondingly numbered
Voice to be selected on the corresponding channel (the
keyboard Voice does not change). The CP33 will normally
also send a MIDI program change number whenever one
of its Voices is selected, causing the correspondingly
numbered Voice or program to be selected on the external
MIDI device if the device is set up to receive and respond
to MIDI program change numbers.
This function makes it possible to cancel program change
number reception and transmission so that, for example,
voices can be selected on the CP33 without affecting the
external MIDI device.
n For information on program change numbers for each of
the CP33’s Voices, refer to MIDI Data Format page 51.
• Setting range: ON/OFF
• Default setting: ON
Control Change ON/OFF
Normally the CP33 will respond to MIDI control change
data received from an external MIDI device or keyboard,
causing the Voice on the corresponding channel to be
affected by pedal and other "control" settings received
from the controlling device (the keyboard Voice is not
affected).
The CP33 also transmits MIDI control change
information when the pedal or other appropriate controls
are operated.
This function makes it possible to cancel control change
data reception and transmission so that, for example, the
CP33's pedal and other controls can be operated without
affecting an external MIDI device.
n For information on control changes that can be used with
the CP33, refer to MIDI Data Format on page 51.
• Setting range: ON/OFF
• Default setting: ON
Initial Setup Send
This function lets you send the data of the panel settings to
a computer. By transmitting the panel settings and
recording them on the MIDI sequence recorder prior to
the actual performance data, the instrument will be
automatically restored to the same settings when the
performance is played back. You can also use this function
to change the settings of a connected tone generator to the
same settings as the instrument.
1. Set up the panel controls as desired.
2. Connect the CP33 to a sequencer via MIDI, and set up
the sequencer so it can receive the setup data.
3. Call up the Function menu and select .
4. Press the [YES/+] button to transmit the panel/status
data.
will appear on the display when the data has been
successfully transmitted.
The following data can be sent.
• Voice selection
• [REVERB] type
• [REVERB] depth
• [EFFECT] type
• [EFFECT] depth
• Split point
• Tuning (F1)
• Dual detune (F3.1)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP33 in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info