7118
47
Zoom out
Zoom in
Previous page
1/80
Next page
CLP-130/120 Detailed Settings – [FUNCTION]
ENGLISH
47
F8.6: (CLP-130)/F7.6: (CLP-120)
MIDI Transmit Transpose
This function allows the MIDI note data transmitted by
the CLP-130/120 to be transposed up or down in semi-
tone increments by up to plus or minus 12 semitones.
The pitch of the CLP-130/120 itself is not affected.
Setting range: -12 – 0 – 12 (in semitones)
Normal setting: 0
F8.7: (CLP-130)/F7.7: (CLP-120)
Panel/Status Transmit
This function causes all the current CLP-130/120 panel
settings (selected voice, etc.) to be transmitted via the
MIDI OUT terminal. This is particularly useful if you
will be recording performances to a MIDI sequence
recorder, such as the Yamaha MIDI Data Filer MDF3,
which will be used to control the CLP-130/120 on play-
back. By transmitting the CLP-130/120 panel settings
and recording them on the MIDI sequence recorder
prior to the actual performance data, the CLP-130/120
will be automatically restored to the same settings when
the performance is played back.
Procedure
1. Set up the panel controls as desired.
2. Connect the Clavinova to a sequencer via MIDI, and
set up the sequencer so it can receive the setup data.
3. Engage Function mode and select (CLP-130)/
(CLP-120).
4. Press the
[+/YES] button to transmit the panel/status
data.
will appear on the LED display when the data has
been successfully transmitted.
F8.8: (CLP-130)/F7.8: (CLP-120)
Bulk Data Dump
You can save current song data on the Clavinova as MIDI
bulk data by transferring it to a connected MIDI data
filer (such as an MDF3) or a sequencer. To play back the
saved song data, send the bulk data back from the storage
device to the Clavinova and follow the usual playback
procedure.
Procedure
1. Record your performance on the Clavinova.
2. Connect the Clavinova to MDF3, a MIDI data filer via
MIDI, and set up the MDF3 so it will receive bulk
data.
3. Engage Function mode and select (CLP-130)/
(CLP-120).
4. Press the [+/YES] button to begin bulk transmission.
will appear on the LED display when the data has
been successfully transmitted.
TERMINOLOGY
Setup Data:
Data that contains a set of panel settings for the Clavinova.
TIP
See page 72 for a list of the Panel Data Contents transmit-
ted by this function.
TIP
Receiving the transmitted data:
1. Connect the Clavinova via MIDI to the device to which the
setup data was transmitted previously.
2. Start sending the setup data from the device.
The Clavinova automatically receives the setup data, which
will be reected in the panel settings.
(For the data to be accepted, the Clavinova that receives the
setup data should be the same model as the one that trans-
mitted the setup data to the sequencer.)
TIP
For more information on transmitting and receiving setup
data via MIDI, refer to the owners manual for the connected
MIDI device.
TERMINOLOGY
bulk data:
A complete set or extended sequence of data
NOTE
No MIDI note/panel data transmission or data reception
occurs during a bulk data dump transmit operation.
TIP
Receiving (returning) the transmitted data:
1. Connect the CLP-130/120 via MIDI to the device to which
the data was previously transmitted.
2. Start sending the data from the device.
The CLP-130/120 automatically receives the data from the
unit. (At this time, any data previously stored in the Clavinova
will be erased.)
Then, follow the usual playback procedure.
(For the data to be accepted, the Clavinova that receives the
data should be the same model as the one from which the
data was once transmitted to the MIDI data ler.)
NOTE
The reload operation cannot be executed when Demo/Preset
Song mode or the user song recorder is in operation, or
when Function mode is engaged.
TIP
For more information on transmitting and receiving bulk data
via MIDI, refer to the owners manual for the connected MIDI
device.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP120 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP120

Yamaha CLP120 User Manual - Dutch - 72 pages

Yamaha CLP120 User Manual - Danish - 77 pages

Yamaha CLP120 User Manual - Italian - 79 pages

Yamaha CLP120 User Manual - Portuguese - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info