7118
45
Zoom out
Zoom in
Previous page
1/80
Next page
CLP-130/120 Detailed Settings – [FUNCTION]
ENGLISH
45
You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage Function mode and select (CLP-
130)/ (CLP-120).
2. Use the [/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range: 1 – 20
Normal setting: 10
This function sets the volume at which a “can-
celed” part is played during preset song play-
back. Adjust the part volume to a comfortable
level and use the “canceled” part as a guide
with which to play along.
1. Engage Function mode and select (CLP-
130)/ (CLP-120).
2. Use the [/NO] and [+/YES] buttons to set the
volume as required.
Setting range: 0 – 20
Normal setting: 5
You can make detailed adjustments to MIDI
settings.
For more information about MIDI, see the
“About MIDI” section (page 49).
1. Engage Function mode and select (CLP-
130)/ (CLP-120).
2. Press the [+/YES] button to engage the MIDI
functions sub-mode, then use the [TEMPO/
FUNCTION# , ] buttons to select the
desired sub-mode.
Press the [/NO] or [+/YES] button to set a
selected parameter.
Sub-mode
F8.1:
(CLP-130)/F7.1: (CLP-120)
MIDI Transmit Channel Selection
In any MIDI control setup, the MIDI channels of the
transmitting and receiving equipment must be matched
for proper data transfer.
This parameter enables you to specify the channel on
which the Clavinova transmits MIDI data.
Setting range: 1 – 16, OFF (not transmitted)
Normal setting: 1
F.6 (CLP-130) / F.5 (CLP-120)
Metronome Volume
TIP
SHORTCUT:
You can jump directly to the metronome functions
(CLP-130)/ (CLP-120) by pressing the [TEMPO/FUNC-
TION#] button while holding the METRONOME [START/
STOP] button.
To exit Function mode, you still need to press the [TEMPO/
FUNCTION#] button so that the TEMPO indicator lights up.
F7. (CLP-130) / F6. (CLP-120)
Preset Song Part Cancel Volume
F8. (CLP-130) / F7. (CLP-120)
MIDI Functions
TIP
The HOST SELECT switch on the bottom surface must be
set to MIDI to enable the MIDI connectors. When you use
the TO HOST connector, set the HOST SELECT switch to
the appropriate position for the type of computer you are
using (pages 4955). In this situation, all MIDI settings
described below will affect the MIDI signal in and out of the
TO HOST connector.
NOTE
In Dual mode, Voice 1 data is transmitted on its specied
channel. In Split mode (CLP-130), right voice data is trans-
mitted on its specied channel. In Dual mode, Voice 2 data is
transmitted on the next greater channel number relative to
the specied channel. In Split mode (CLP-130), left voice
data is transmitted on the next greater channel number rela-
tive to the specied channel. In either mode, no data is trans-
mitted if the transmit channel is set to OFF.
NOTE
Demo/preset song data and recorder playback data are not
transmitted via MIDI.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP120 in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP120

Yamaha CLP120 User Manual - Dutch - 72 pages

Yamaha CLP120 User Manual - Danish - 77 pages

Yamaha CLP120 User Manual - Italian - 79 pages

Yamaha CLP120 User Manual - Portuguese - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info