593332
97
Zoom out
Zoom in
Previous page
1/104
Next page
CLP-970A 97
CLP-970A/970AM/970AC: Keyboard Stand Assembly
3. Mount the main unit.
4. Fix the main unit.
5. Connect the pedal cord.
6. Secure the pedal cord.
7. Set the voltage selector and connect
the power cord.
CAUTION
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
Do not hold the keyboard in any position other
than the position shown in the above illustration.
Be sure to place your hands at least
10 centimeters from either end of the
main unit when positioning it.
at least
10 cm
(2) Use short flat-head screws 2 to
secure the main unit from the
front.
* Use the rear hole on the front
brackets to attach the screws.
(1) Center the main unit to produce equal clearance
on the left and right sides.
(1) Pass the pedal cord plug
from the rear as shown,
and insert the plug into the
PEDAL jack.
(2) Use a vinyl tie to
take up any slack in
the pedal cord.
(1) Attach the cord
holders to the rear
panel as shown, then
clip the cord into the
holders.
Voltage Selector
Before connecting the
AC power cord, check
the setting of the
voltage selector which
is provided in some
areas. To set the
selector for 110V, 127V,
220V or 240V main
voltages, use a “minus”
screwdriver to rotate the selector dial so that the correct
voltage for your region appears next to the pointer on the
panel. The voltage selector is set at 240V when the unit is
initially shipped.
After the proper voltage has been selected, connect the AC
power cord to the AC INLET and an AC wall outlet. A plug
adaptor may be also provided in some areas to match the
pin configuration of the AC wall outlets in your area.
CAUTION
An improper voltage setting can cause serious damage
to the Clavinova or result in improper operation.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CLP-970AM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CLP-970AM in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CLP-970AM

Yamaha CLP-970AM User Manual - English - 36 pages

Yamaha CLP-970AM User Manual - Spanish - 36 pages

Yamaha CLP-970AM User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info