586874
25
Zoom out
Zoom in
Previous page
1/31
Next page
21
Group B Functions
0-127 (0-7F) <<F3 SS>>
MSB: 000-127 (00-7F) <<F2 lsb msb>>
LSB: 000-127 (00-7F)
<<Bn 79 00>>
——
——
——
——
——
<<B0 78 00, B1 78 00, ..., BF 78 00>>
——
<<F0 41 10 42 12 40 00 7F 00 41 F7>>
——
ON, OFF ON
1-10 (1-A) 5
1: easy-10: hard
MSB: 000-127 (00-7F)
<<Bn 64 lsb, Bn 65 msb, Bn 06 vv>>
LSB: 000-127 (00-7F)
Value: 0-127 (0-7F)
Controller number: <<Bn gg vv>>
0-148 (0-94)
Value: 0-127 (0-7F)
MSB: 000-127 (00-7F)
<<Bn 62 lsb, Bn 63 msb, Bn
06 vv>>
LSB: 000-127 (00-7F)
Value: 0-127 (0-7F)
1-16 (1-10) 1
——
——
0-255 (0-FF) <<xx>>
Song Select command for sequencer/rhythm machine.
Song Position Pointer for sequencer/rhythm machine.
This resets all MIDI controller values to their reset values (minimum or center).
This turns all sounds off over all MIDI channels. To turn all sounds off for one specific MIDI channel,
use SOUND OFF in Group A.
This performs a GM-B reset on a connected tone generator. (This affects only certain tone generators,
making their operation compatible with the Yamaha TG300.)
This merges all data received over the selected MIDI channel with the data generated by the CBX-K1.
This function can be set independently for each channel.
This determines the relative velocity sensitivity of the CBX-K1 keyboard. The lower the Touch
Sensitivity value, the higher the output velocity becomes. In other words, when this is set to a value
near 0, the less playing strength that is needed to get a louder sound from a connected tone generator.
This allows you to directly send a specific value for a selected RPN controller number, without altering
the current controller assignment of the ASSIGNABLE Wheel.
This allows you to directly send a specific value for a selected Control Change controller number,
without altering the current controller assignment of the ASSIGNABLE Wheel.
This allows you to directly send a specific value for a selected NRPN controller number, without
altering the current controller assignment of the ASSIGNABLE Wheel.
This determines the Device Number when independently transmitting certain messages (such as XG
On and Master Tuning) to more than one connected MIDI devices.
This inverts the operation of both Wheels, for ease in playing the CBX-K1 as a hand-held keyboard. An
alternate way to change this setting is to simultaneously hold down N and turn on the
power.
This inverts the MSB/LSB entry (so that LSB precedes MSB). An alternate way to change this setting
is to simultaneously hold down M and turn on the power.
This sends a data message of a single byte. (See page 17.)
Explanation Range (Hexadecimal Default MIDI Code
in parentheses) Setting
MSBa
precedes LSB
Maximum
value is
toward rear
panel.
Footnotes
*1 For toggle (on/off) switch functions, the OCTAVE lamps
blink rapidly when the function is set to ON, and flash
once when it is set to OFF.
*2 When Fixed Velocity (in Group A) is set to a value
other than 0, the Touch Sensitivity function is inactive.
The following table shows the velocity range for some
Touch Sensitivity settings.
*3 To send a specific value for the current control number
assignment of the Wheel, hold down C, enter the
desired value, and press L. However, this cannot
be done with controller numbers 143 (Polyphonic Key
Pressure), 147 (Velocity), or 148 (Tempo).
Touch Sensitivity Value 1 (1) 5 (5) 10 (A)
Velocity Range 32-127 16-127 1-127
(20-7F) (10-7F) (01-7F)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CBX-K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CBX-K1 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CBX-K1

Yamaha CBX-K1 User Manual - German - 32 pages

Yamaha CBX-K1 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info