586874
23
Zoom out
Zoom in
Previous page
1/31
Next page
19
Group A Functions
Footnotes
*1 For toggle (on/off) switch functions, the V /
B lamps blink rapidly when the function is set
to ON, and flash once when it is set to OFF.
*2 To send a specific value for the current control number
assignment of the Wheel, hold down C, enter the
desired value, and press L. However, this cannot
be done with controller numbers 143 (Polyphonic Key
Pressure), 147 (Velocity), or 148 (Tempo).
*3 Transpose can be done in two ways: by repeatedly
pressing the appropriate TRANSPOSE key or by
entering the transpose value directly after pressing the
appropriate TRANSPOSE key. To restore the normal
transpose setting, hold C and press both
G / H keys simultaneously.
<<FC>>
<<FB>>
<<FA>>
0, 20-300 (0, 14-12C) 120 <<F8>>
(0: MIDI clock off)
MSB: 000-127 (00-7F)
<<Bn 00 msb, Bn 20 lsb, Cn pp>>
LSB: 000-127 (00-7F)
0-127 (0-7F) 0 <<Cn pp>>
<<F0 7E 7F 09 01 F7>>
<<Bn 78 00>>
——
<<F0 43 ls 4C 00 00 7E 00 F7>>
ON, OFF ON
1-16 (1-10) 1
0, 1-127 (0, 1-7F) 0
MSB: 000-127 (00-7F)
<<Bn 64 lsb, Bn 65 msb, Bn 06 vv>>
LSB: 000-127 (00-7F)
0-148 (0-94) 1 <<Bn gg vv>>
MSB: 000-127 (00-7F)
<<Bn 62 lsb, Bn 63 msb, Bn 06 vv>>
LSB: 000-127 (00-7F)
0-127 (00-7F) 0
0-12 (0-C) 0
0-12 (0-C) 0
Explanation Range (Hexadecimal Default MIDI Code
in parentheses) Setting
Stop command for sequencer/rhythm machine.
Continue command for sequencer/rhythm machine.
Start command for sequencer/rhythm machine.
Tempo entry for sequencer/rhythm machine. Setting this to 0 disables the MIDI clock transmission.
When ASSIGNABLE Wheel is set to Tempo (cntrl. no. 148), this is inactive.
This allows selection of voice banks on tone generators that support multiple banks. The bank select
message must include both MSB and LSB values.
This allows entry of program numbers. Stepping up or down through program numbers is also possible
by holding down C and using the N / M buttons; see page 10.
This resets the connected tone generator to General MIDI operation. WARNING: Be careful when using
this, since it automatically changes whatever settings you’ve made on the tone generator. (Only GM-
compatible tone generators respond to this message.)
This turns all sounds off over the current MIDI channel. To turn all sounds off for all MIDI channels,
use All Sound Off in Group B.
This resets the connected tone generator to XG operation. WARNING: Be careful when using this, since
it automatically changes whatever settings you’ve made on the tone generator. (Only XG-compatible tone
generators respond to this message.)
When set to ON, this merges all data received at MIDI IN with the data generated by the CBX-K1. Merge
can be set independently for each channel in the Group B functions.
This determines the MIDI transmit channel for the CBX-K1. This should be set to match the MIDI
receive channel of the connected MIDI device.
This sets a fixed velocity value for the keyboard; in other words, playing the keyboard at any strength
results in a certain velocity value. When this is set to 0 (initial touch on), Touch Sensitivity can be set in
the Group B functions. When ASSIGNABLE Wheel is set to Velocity (147), this is inactive.
This determines the RPN (Registered Parameter Number) for the ASSIGNABLE Wheel. This function
should be used for all RPN’s not listed on the panel. The message must include both MSB and LSB
values.
This determines the Controller Number for the ASSIGNABLE Wheel. Though not all are listed on the
panel, any of the standard Control Change numbers (0 -119) can be assigned. The RPN, NRPN and
Others numbers on the panel can also be assigned here.
This determines the NRPN (Non-Registered Parameter Number) for the ASSIGNABLE Wheel. This
function should be used for all NRPN’s not listed on the panel. The message must include both MSB
and LSB values.
This determines the drum number for use with the drum-related controller numbers (131-141).
This lowers the key transposition by the specified amount (in semitones).
This raises the key transposition by the specified amount (in semitones).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CBX-K1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CBX-K1 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CBX-K1

Yamaha CBX-K1 User Manual - German - 32 pages

Yamaha CBX-K1 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info