When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver.
The settings are not effective when outputting bitstream signals.
Component Resolution
This sets the video output resolution when using the component video terminal.
•576i/480i•576p/480p•720p•1080i
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
Even if you select “720p” or “1080i”, the video output resolution is restricted to “576p/480p”
when DVD-Video and BD-Video discs recorded at a rate of 50 frames per second is output
from the COMPONENT VIDEO OUT terminals.
Speaker
You can set the unit to output the best possible sound for your speakers.
•Multi Channel
:When using 3 or more speakers. (]below)
•2 Channel:When using two speakers.
2ch down-mix audio are output from Front L and Front R.
TV System
Change the setting to match the equipment you are connecting with.
•If picture output is not smooth, change the setting.
•When NTSC contents are played, they are outputted in the signal format
specified in the “NTSC Contents Output’, irrespective of the settings here.
•NTSC:Select when connecting to a NTSC television.
•PAL
:Select when connecting to a PAL or multi-system television.
Changing the speaker setting to suit your speakers
*Surround back channel is enabled only when the unit is connected to an amplifier/
receiver supporting HDMI 7.1 channel audio.
Speaker presence and size ()
1Press [, , , ] to select the speaker icon () and press [OK].
2
Press [, ] to select the setting and press [OK].
Icon examples:
Surround speaker (LS)
•Large:Select when the speaker supports
low-frequency (under 100 Hz)
reproduction.
•Small:Select when the speaker does not support low-frequency reproduction.
In order to make an ideal listening environment, settings of speaker sizes may be
automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will automatically be set
to “Large”. (In this case, we recommend connecting a speaker that can reproduce bass
below 100 Hz.)
Delay time ()
For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the
subwoofer, should be the same distance from the seating position.
If you have to place the centre, surround and surround back speakers closer to the seating
position, adjust the delay time to make up for the difference.
If either distance or is less than , find the difference in the relevant table and
change to the recommended setting.
1Press [, , , ] to select the delay time box () and press [OK].
2Press [, ] to select the setting and press [OK].
Channel balance ()
This does not work when connected with the HDMI terminal and “HDMI Audio Output”
(]21) is set to “On”.
1Select “Test” and press [OK].
A test signal is output.
Front (L)CentreFront (R)Surround (RS)
Surround (LS)Surround Back (LB)*Surround Back (RB)*
*Test signal is output only when the unit is connected using HDMI AV OUT
terminal.
2While listening to the test signal, press [, ] to adjust the volume of each speaker
Front speakers: 0.0 to – 6.0 dB
Centre and surround speakers: 0.0 to –12.0 dB
•You cannot adjust the volume of surround back speakers.
3Press [OK].
The test signal stops.
•No signal is output for the subwoofer. To adjust its volume, play something, then
return to this screen to adjust to suit your taste.
4Press [, , , ] to select “Complete” and press [OK].
ms
ms
L
Complete
R
SW
dB
dB
dB
dB
dBdB
ms
ms
LBRB
0.0
0.00.0
0.0
0.0
0.0
0.00.00.0
C
Test
LSRS
Centre
Front (L)
Front (R)
Subwoofer
(LS) Surround (RS)(LB) Surround back (RB)*
Complete
Test
LS
LS
LargeSmallNo
Centre speakerSurround/Surround back
speakers
DifferenceSetting
Approx. 34 cm (1 ft. 1 in.)1.0 msDifference Setting
Approx. 68 cm (2 ft. 2 in.)2.0 msApprox. 170 cm (5 ft. 6 in.)5.0 ms
Approx. 102 cm (3 ft. 4 in.)3.0 msApprox. 340 cm (11 ft. 1 in.)10.0 ms
Approx. 136 cm (4 ft. 5 in.)4.0 msApprox. 510 cm (16 ft. 8 in.)15.0 ms
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha BD-S2900 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha BD-S2900 in the language / languages: English as an attachment in your email.
The manual is 14,39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
