The unit outputs Dolby Digital or DTS Digital Sound for Dolby Digital Plus/Dolby True HD, DTS-HD, or outputs as “the original format” in the following cases:
–The connected device does not support Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or DTS-HD Master Audio.
–Since multiple devices are connected using HDMI cables, operations on the device are restricted.
Regarding 7.1ch LPCM
The settings described below are recommended to output as the original format.
–Connect the unit with the HDMI AV OUT terminal
*1
–Set “BD-Video Secondary Audio” to “Off”. (Otherwise down-mixed 5.1ch PCM will be output from the HDMI AV OUT terminal.)
*1Down-mixed 2ch PCM is output from the DIGITAL AUDIO OUT terminal, regardless of the “BD-Video Secondary Audio” setting.
■“Display”
■“TV/Device Connection”
On-screen Messages
Choose whether to show status messages automatically.
•Automatic•Off
On-screen Language
Choose the language for these menus and on-screen messages.
•English
•Français•Español
•Deutsch•Italiano•Nederlands
Screen Saver Function
This is to prevent burn-in on the screen.
•When this is set to “On”, the masked-off area on the screen becomes gray.
[Only when connecting with an HDMI cable or a component video cable and
“HDMI Video Format” (]below) is set to any other mode than “576p/480p”,
or “Component Resolution” (]22) is set to “720p” or “1080i”]
•On
:
If there is no operation for 10 minutes or more, the displayed screen switches to the other
states automatically.
–When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
–When still pictures are shown (except for slideshows), the display
returns to the Direct Navigator screen.
•Off
FL Display
Changes the brightness of the unit’s display.
•Bright
•Dim:The display is dimmed.
•Automatic:The display is dimmed during playback and bright except playback.
SD Card LED Control
Set the lighting method for the lamp by the SD card slot.
•On
•Off
•SD inserted:When this unit is turned on and SD card is inserted, the lamp is lighted.
Software LicenseInformation about the software used by this unit is displayed.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television:
•4:3 Pan & Scan:Video recorded for a widescreen is played as Pan & Scan (unless
prohibited by the producer of the disc). When playing BD-Video, video
is output as “4:3 Letterbox”.
•4:3 Letterbox:Video recorded for a widescreen is played in the letterbox style.
When connected to a 16:9 widescreen television:
•16:9
:Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio image
in the centre of the screen.
•16:9 full:Video recorded for 4:3 aspect screen is displayed as a horizontally
stretched 16:9 image.
HDMI Connection
•Press [OK] to show the following settings.
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT terminal.
•On
:Images are output from the HDMI terminal in the resolution set in
“HDMI Video Format”. Video from COMPONENT VIDEO OUT
terminal is output as “576i/480i”.
•Off:Images are not output from the HDMI terminal.
Video from COMPONENT VIDEO OUT terminal is output in the
resolution set in “Component Resolution” (]22).
HDMI Video Format
The items supported by the connected devices are indicated on the screen as
“*”. When any item without “*” is selected, the images may be distorted.
•Automatic
:Automatically selects the output resolution best suited to the connected
television (1080p, 1080i, 720p or 576p/480p).
•576p/480p•720p•1080i•1080p
When the unit is connected to an amplifier/receiver that does not support the resolution set on
the unit, the video cannot be output properly. In this case, use the HDMI cable to connect the
unit to the TV and then connect the unit to the amplifier/receiver using a cable other than
HDMI.
BD-Video 24p Output
When playing BD-Video recorded in 24 frames, this unit displays each frame at
1/24 second intervals–the same interval originally shot with the film movie.
•This item can be set only when the unit is connected to a TV with an HDMI
terminal that supports 1080/24p input.
•On:Images in 24p are output in 24p as they are.
(This is effective only when “HDMI Video Format” is set to
“Automatic” or “1080p” and “TV Aspect” is set to “16:9” or “16:9
full”.)
However,
–when video is being output at 24 frames, images from any other
terminal than the HDMI terminal may not be output properly.
–when images other than 24p are played, images are output at 60p.
•Off
HDMI Output Range
Effective when connected to a device that only supports RGB output.
•Standard
•Enhanced:When the black and white images are not distinct.
HDMI Audio Output
This setting selects whether or not to output audio from HDMI.
•On
•Off:When the TV is connected to this unit using an HDMI cable, and this
unit is also connected to other devices, such as an amplifier/receiver
using an optical digital audio cable or a coaxial cable.
HDMI Control
Set to use linked operations with the TV function when connected with an
HDMI cable to a device that supports the same function.
•On:Select when you want to use linked operations with the TV.
•Off
:Select when you do not want to use linked operations with the TV.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha BD-S2900 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha BD-S2900 in the language / languages: English as an attachment in your email.
The manual is 14,39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
