5
Play the source.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 8.)
6
Adjust to the desired output level.
6
OPERATIONS
Note
In the step 3, if two or more program sources are selected at
the same time (by using input selectors), be sure to remember
the priority order of the input sources.
Priority order of audio sources: 1) TAPE 1, 2) VCR/TAPE 2,
3) LD/TV, TUNER, CD or PHONO.
Priority order of video sources: 1) VCR/TAPE 2 , 2) LD/TV.
●
If you select LD/TV, TUNER, CD or PHONO, be sure that
TAPE 1 and/or VCR/TAPE 2 are not being selected.
●
If you select TAPE 1 and VCR/TAPE 2, and another input
selector at the same time, the result will be the visual of
VCR/TAPE 2 and the sound from TAPE 1.
●
If you select both LD/TV and TAPE 1 at the same time, the
result will be the visual of LD/TV and the sound from TAPE
1.
●
Once you play the LD player, its visual will not be interrupted
even if other input selectors except VCR/TAPE 2 are
selected.
TO PLAY A SOURCE
1
Set to the “
∞
” position.
2
3
Select a desired input source.
(For video sources, turn the TV/monitor ON.)
*
The indicator corresponding to the selected input source
will illuminate.
*
Note that pressing on each input selector selects the
source which is connected to the corresponding input
terminals on the rear panel.
4
Select the speakers to be used.
*
If you use two speaker systems, press both the A and B
switches.
3
7
42
1,6
