163
14. MIDI
To select the MIDI page:
Press the PITCH/MIDI button in the DISPLAY SELECT section, and select the MIDI page by
pressing the appropriate Menu button.
MIDI CONTROL Page
1 MODE
Determines the MIDI operating mode of the AR-100. This should be set to match the
connected MIDI device to ensure proper MIDI control and response.
• Electone
Select this setting when using the AR-100 with another Electone. (This is the default setting.)
• DOC
Select this setting when using the AR-100 with instruments compatible with Disk Orchestra
Collection (D.O.C.) software. The Mode automatically changes to DOC when a “DOC On”
MIDI message is received, or when a D.O.C. disk has been inserted in the M.D.R. disk slot.
• XG/GM
Select this setting when using the AR-100 with XG- and GM-compatible devices. The Mode
automatically changes to XG/GM when a “XG On” or “GM On” MIDI message is received,
or when a XG or GM disk has been inserted in the M.D.R. disk slot.
2 OUTPUT (UPPER, LOWER, PEDAL)
Determines the channels over which MIDI data is sent, for each keyboard. To restore the
default setting for each of these parameters, press both of the corresponding Data Control
buttons (“up” and “down” buttons) simultaneously.
