48724
111
Zoom out
Zoom in
Previous page
1/122
Next page
111
Channel Mode Messages
The following Channel Mode Messages can be received.
All Sounds Off (Control #120)
Clears all sounds currently sounding on the specified
channel. However, the status of channel messages such
as Note On and Hold On is maintained.
Reset All Controllers (Control #121)
The values of the following controllers will be reset to
the defaults: Pitch Bend, Channel Pressure, Sustain
Switch, Modulation, Expression, Portamento, RPN*,
Volume, Pan, Effect Send Level 1, 3, 4.
* Number not specified; internal data will not change.
All Notes Off (Control #123)
Clears all notes currently on for the specified channel.
However, if Sustain Switch is on, notes will continue
sounding until these are turned off.
Mono (Control #126)
Performs the same function as when an All Sounds Off
message is received, and if the 3rd byte (mono
number) is in the range of 0 - 16, sets the
corresponding channel to Mono Mode (Mode 4 : m =
1).
Poly (Control #127)
Performs the same function as when an All Sounds Off
message is received, and sets the corresponding
channel to Poly Mode (Mode 3).
Program Change
Messages which select voices.
Channel Aftertouch
Messages which let you control the sounds by the pressure
you apply to the keys after the initial striking of the keys,
over the entire channel.
Pitch Bend
Pitch Bend messages are continuous controller messages
that allow the pitch of designated notes to be raised or
lowered by a specified amount over a specified duration.
2nd BYTE 3rd BYTE MESSAGE
120 0 All Sounds Off
121 0 Reset All Controllers
123 0 All Notes Off
126 0 ~ 16 Mono
127 0 Poly
2. SYSTEM MESSAGES
System messages are the data related to the overall system
of the device.
System Exclusive Messages
System Exclusive messages control various functions of the
AN1x, including master volume and master tuning, effect
type and various other parameters.
Master Volume
When received, the Volume MSB will be effective for
the System Parameter.
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
* mm(MSB) = appropriate volume value, ll(LSB) =
ignored
Active Sensing
Once FE (Active Sensing) has been received, if no MIDI
data is subsequently received for longer than an interval of
approximately 300msec, the AN1x will perform the same
function as when All Sounds Off, All Notes Off, and Reset
All Controllers messages are received, and will then return
to a status in which FE is not monitored.
Refer to the MIDI Data Format in the separate Data List
book for more information about the various messages.
Control Change Modes
The AN1x has two Control Change modes. Mode 1
corresponds to the list of Control Change parameters
according to the MIDI standard. Mode 2 is a special list of
Control Change parameters unique to the AN1x.
For information about changing modes, see page 96. For a
list of Control Change parameters for each mode, see the
separate Data List book.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info