48724
110
Zoom out
Zoom in
Previous page
1/122
Next page
110
Pan (Control #010)
Messages which control the stereo panning position of
each voice (for stereo output).
Setting the value to 127 positions the sound to the far
right and 0 positions the sound to the far left.
Expression (Control #011)
Messages which control intonation expression of each
voice during performance.
Setting the value to 127 produces maximum volume
and 0 results in volume off.
Sustain Switch (Control #064)
Messages which control sustain on/off.
Setting the value between 64 - 127 turns the sustain
on, between 0 - 63 turns the sustain off.
Portamento Switch (Control #065)
Messages which control portamento on/off.
Setting the value between 64 -127 turns the
portamento on, between 0 - 63 turns the portamento
off.
Harmonic Content (Control #071)
Messages which adjust the VCF resonance set for each
voice.
Higher values will result in a more characteristic,
resonant sound. Depending on the voice, the effective
range may be narrower than the range available for
adjustment.
Release Time (Control #072)
Messages which directly adjust the AEG release time
set for each voice.
Attack Time (Control #073)
Messages which directly adjust the AEG attack time set
for each voice.
Brightness (Control #074)
Messages which directly adjust the VCF cutoff
frequency set for each voice.
Lower values will result in a softer sound. Depending
on the voice, the effective range may be narrower than
the range available for adjustment.
Effect1 Depth (Reverb) (Control
#091)
Messages which adjust the send level for the Reverb
effect.
Effect3 Depth (Variation [Chorus])
(Control #093)
Messages which adjust the dry/wet balance for the
Chorus Variation Effect.
Effect4 Depth (Delay Depth) (Control
#094)
Messages which adjust the send level for the Delay
effect.
Data Increment (Control #096)
Decrement (Control #097) for RPN
Messages which increase or decrease the MSB value
of pitch bend sensitivity.
You must assign one of those parameters using the RPN
in the external device in advance.
The data byte is ignored.
When the maximum value or minimum value is
reached, the value will not be incremented or
decremented further. (Incrementing the fine tune will not
cause the coarse tune to be incremented.)
RPN (Registered Parameter Number)
LSB (Control #100)
RPN (Registered Parameter Number)
MSB (Control #101)
Messages which offset, or add or subtract values from
a voice's pitch bend sensitivity.
First send the RPN MSB and RPN LSB to specify the
parameter which is to be controlled. Then use Data
Increment/Decrement to set the value of the specified
parameter.
Note that once the RPN has been set for a channel,
subsequent data entry will be recognized as the same
RPN's value change. Therefore after you use the RPN,
you should set a Null (7FH, 7FH) value to avoid an
unexpected result.
Messages which can be received are as follows:
RPN MSB RPN LSB PARAMETER
00 00 Pitch Bend Sensitivity
00 01 Fine Tune
00 02 Coarse
7F 7F Null
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info