48724
95
Zoom out
Zoom in
Previous page
1/122
Next page
2. Press [YES/ENTER] to initiate the bulk dump.
When the operation is finished, “End” will
appear briefly in the LCD, which will then return
to its prior display.
To stop a bulk dump operation in progress, press [NO]. The
LCD will return to its prior status.
Receive Bulk Dump
A Receive Bulk Dump operation lets you load data back into
the AN1x from an external MIDI device.
The type of data which can be received depends on the
current mode. For more information, see the MIDI data
format, in the separate Data List book.
Before initiating a Receive Bulk Dump operation, the Device
Number for both devices must be matched. (For more
information, see Device No, on the previous page.)
ABC
0
VWX
MNO
7
YZ
8
PQR
5
GHI
2
4
DEF
1
OTHERS
STU
9
6
JKL
3
YES/ENTERNO
Ctrl (Control)
Control parameters let you designate the type of
Control Change messages which can be controlled by
the [MODULATION] Wheel, each of the eight
CONTROL knobs, the [RIBBON] Controller, etc., by
assigning Control Change numbers to specific
controllers ("devices"). There are two parameters
available, Device and Control Number.
Based on settings made here as well as in the Control
Matrix (see pages 51, 73), you can use a single
controller to control one parameter of the internal tone
generator and another parameter of an external MIDI
device, both at the same time. It also lets you
determine which device (MW, FC, etc.) to use for
Scene Control.
Device
The Device parameter lets you select the controller to
which you want to assign a Control Number.
Ctrl No (Control Number)
The Control Number parameter lets you designate the
Control Change number (type of parameter) which the
Device (controller) will control.
For information about MIDI and MIDI Control Change messages, see page 109.
Settings: 0 (off), CC 1 ~ 95, After Touch
Procedure
1. Press Device [UP/DOWN] to select the name of
the controller to which you want to assign a
controller number.
Controllers:
MW: Modulation Wheel
FV: Foot Volume
FC: Foot Controller
FS: Footswitch
RbnX: Ribbon Controller X-axis
RbnZ: Ribbon Controller Z-axis
Knob1~8: Assign group knobs 1 ~ 8
SCENE: Scene Control controller
95
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info