48724
94
Zoom out
Zoom in
Previous page
1/122
Next page
Bulk Dump
The Bulk Dump parameter lets you initiate bulk dump
operations when offloading AN1x data to an external
MIDI data storage device (such as the Yamaha MDF2
MIDI Data Filer) or another AN1x. Bulk dump
operations let you back up your important voice, Free
EG, pattern and system data for safekeeping, and then
load them back into the AN1x whenever you wish.
Before initiating a bulk dump operation, you must set up the external device for
bulk dump send and/or receive. You’ll also need to match the Device Number of
the AN1x and the external device. For information, see the owner’s manual which
came with the external device.
Send Bulk Dump
1.
Press BulkDump [UP/DOWN] to select the type
of data to be sent.
Available types:
1scene: Sends the data of the currently selected Scene.
1vce: Sends the data of the currently selected Voice.
1-64 vce: Sends data for voice set 1 ~ 64.
65-128 vce: Sends data for voice set 65 ~ 128.
all voices: Sends data for all 128 voices.
1ptn: Sends data for the pattern currently selected in the Step
Sequencer.
1-64 ptn: Sends data for the User Pattern bank 1-64.
65-128 ptn: Sends data for the User Pattern bank 65-128.
all ptn: Sends all Step Sequencer User Pattern data.
system: Sends all system parameter data.
all: Sends all data in memory.
DeviceNo (Device Number)
The Device Number parameter lets you set the MIDI
device number when performing bulk dump operations,
or when transmitting and receiving System Exclusive
messages. Both devices should be set to the same
channel number.
Settings: 1 ~ 16, all, off
Local
The Local parameter lets you designate the AN1x’s
keyboard to play the internal tone generator or not.
When set to “on”, playing the AN1x’s keyboard will
cause the internal tone generator to sound. When set
to “off”, playing the keyboard will not play the internal
tone generator, but will output note data via MIDI
[OUT] to play an external tone generator or record into
an external sequencer.
Normally this will be set to “on” unless you are using
the AN1x as a master keyboard controller for
recording note data into an external MIDI sequencer,
and having the output of the sequencer determine
whether the AN1x’s tone generator plays or not, by
signals received at MIDI [IN].
Settings: on, off
External MIDI Device
MIDI OUT
MIDI IN (Rx Ch)
MIDI IN
MIDI OUT (Tx Ch)
Local on/off
switch
Keyboard
Controller
AN1x
Tone
Generator
ARP/SEQ
94
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha AN1X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha AN1X in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha AN1X

Yamaha AN1X User Manual - German - 121 pages

Yamaha AN1X User Manual - Dutch - 138 pages

Yamaha AN1X User Manual - French - 120 pages

Yamaha AN1X User Manual - Portuguese - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info