48722

Yamaha A4000 Manual

260
Zoom out
Zoom in
Previous page
1/296
Next page
Effect Parameter List
260 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
13: RADIO
1 Noise Level 0 — 127 Degree of noise modulation
2 Tone 0 — 127 Tone of noise modulation
3 Mod LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
4 Mod LPF Resonance 1.0 — 12.0 Resonance of low pass filter
5 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
6 LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
7 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
14: DIGITAL TURNTABLE
1 Click Density 0 — 5 Frequency with which the click sounds will occur
2 Click Level 0 — 127 Level of the click sounds
@3 Noise Tone 0 — 6 Tone of noise
4 Noise Mod Speed 0.00Hz — 39.7Hz Amplitude modulation frequency of the noise
5 Noise Mod Depth 0 — 127 Amplitude modulation depth of the noise
6 Dry Send to Noise 0 — 127 Mixture of dry signal into the noise
7 Noise LPF Freq 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
8 Noise LPF Q 1.0 — 12.0 Low pass filter resonance
9 Noise Level 0 — 127 Noise level
10 Dry LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
11 Dry Level 0 — 127 Level of the dry sound
15: LOFI
1 SamplingFreq Ctrl 44.1kHz — 344Hz Selects the sampling frequency
2 Word Length 1 — 127 Sets the sound’s “roughness”
3 Output Gain -6dB — +36dB Output gain
@4 Filter Type thru,PowerBass,Radio,Telephone,Clean,Low Selects the type of sound
5 PreLPF CutoffFreq 63Hz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
6 PreLPF Resonance 1 — 12.0 Adds character to the input low-pass filter
7 Emphasis off/on Changes the high-frequency characteristics
8 Bit Assign 0 — 6 Adjusts the effect of the Word Length
9 Input Mode mono/stereo Mono/stereo input mode selection
10 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
16: LOW PASS FILTER, 17: HIGH PASS FILTER
1 Cutoff Freq 32Hz — 18.0kHz Specifies the filter cutoff frequency
2 Q 0 — 113 Sets the Q
@3 Filter Type -48dB, -24dB Selects the filter type
4 Q Type x1, x2 Selects the Q type
5 Output Gain -12dB — +12dB Output level
Noise may be produced with some voices when the “1. Cutoff Freq” is varied rapidly.
18: BAND PASS FILTER
1 Cutoff Freq 32Hz — 18.0kHz Specifies the filter cutoff frequency
2 Band Width 1 — 32 Sets the filter bandwidth
3 Q 0 — 113 Sets the Q
4 Output Gain -12dB — +12dB Output level
Noise may be produced with some voices when the “1. Cutoff Freq” is varied rapidly.
19: AUTO WAH + DIST, 20: AUTO WAH + OVERDRIVE
1 LFO Frequency 0.0Hz — 39.70Hz Frequency at which the wah filter will be controlled
2 LFO Depth 0 — 127 Depth at which the wah filter will be controlled
3 Cutoff Freq Offset 0 — 127 Offset value for the wah filter control frequency
4 Resonance 1 — 12.0 Bandwidth of the wah filter
5 Drive 0 — 127 (Distortion) Degree of distortion
6 PostDrive EQ Low -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the low range
7 PostDrive EQ Mid -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the mid range
8 PostDrive LPF Freq 1.0kHz — 18.0kHz, thru (Distortion) Frequency at which the filter will cut the high range
9 Drive Output Level 0 — 127 (Distortion) Output level
10 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
11 EQ Low Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the low range
12 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the high range
14 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
21: TOUCH WAH + DIST, 22: TOUCH WAH + OVERDRIVE
1 Sensitive 0 — 127 Sensitivity at which the wah filter will change in response to the input level
2 Cutoff Freq Offset 0 — 127 Offset value for the wah filter control frequency
3 Resonance 1 — 12.0 Bandwidth of the wah filter
4 Drive 0 — 127 (Distortion) Degree of distortion
5 PostDrive EQ Low -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the low range
6 PostDrive EQ Mid -12dB — +12dB (Distortion) Gain by which the EQ will boost/cut the mid range
7 PostDrive LPF Freq 1.0kHz — 18.0kHz, thru (Distortion) Frequency at which the filter will cut the high range
8 Drive Output Level 0 — 127 (Distortion) Output leve
9 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
10 EQ Low Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the low range
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Amount of gain by which the EQ will boost/cut the high range
13 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
… 260 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info