48722

Yamaha A4000 Manual

258
Zoom out
Zoom in
Previous page
1/296
Next page
Effect Parameter List
258 Appendix • A5000/A4000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Effect Parameter List
This section explains the meaning of each parameter in each effect.
The tables give the parameter number, the range of settings (or selections), and the explanation.
(“@” marked parameters have no effect even if a program controller is assigned to the function)
1: DIGITAL SCRATCH
1 Input Level 0 — 127 Scratch depth
2 Initial Delay 0.1 — 460.0ms Delay time
3 Scratch Speed 1 — 127 Scratch modulation frequency
4 Scratch Depth 0 — 127 Scratch modulation depth
5 Auto Pan Speed 0.00Hz — 39.7Hz Autopan frequency
6 Auto Pan Depth 0 — 127 Autopan depth
7 EQ Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Gain -12 — +12dB Gain by which the EQ will boost/cut the mid range
9 EQ Width 1.0 — 12.0 Width of the mid range area boosted/cut by the EQ
10 HPF Frequency thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
11 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
2: AUTO SYNTH
1 Mod Speed 0 — 127 Modulation speed
2 Mod Wave Type TypeA,TypeB,TypeC,TypeD Modulation type
3 Mod Depth 0 — 127 Modulation depth
4 Mod Depth Ofst R -64 — +63 R ch offset relative to modulation depth
5 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
6 HPF Frequency thru,22Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
7 Dry Mix Level 0 — 127 Add dry sound before the delay input
8 Delay Time 0.1 — 370.0ms Delay time
9 Delay Time Ofst R 0 — -884 Delay time offset for the R ch offset
10 Feedback Level -63 — +63 Feedback amount
11 FB Level Ofst R -63 — +63 Feedback offset for the R ch
12 Delay Level 0 — 127 Delay level
13 AM Speed 0 — 127 Modulation frequency
14 AM Wave tri,sine,saw up,saw down Select modulation waveform
15 AM Depth 0 — 127 Amplitude modulation depth
16 AM Inverse R normal,inverse Left/right phase reversal of the amplitude modulation signal
3: TECH MODULATION
1 Mod Speed 0 — 127 Modulation speed
2 Mod Depth 0 — 127 Modulation depth
3 Pre Mod HPF Freq thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
4 Mod Gain -12 — +12dB Gain of the modulation signal
5 Mod LPF Frequency 1.0kHz — 18.0kHz, thru Frequency at which the low pass filter will cut the high range
6 Mod LPF Resonance 1.0 — 12.0 Resonance of the low pass filter
7 Mod Mix Balance D63>W — D=W — D<W63 Balance between the effect sound and the dry sound before the delay input
8 Delay Time 0.1 — 740.0ms Delay time
9 Delay Time Ofst R 0 — -884 Delay time offset for the R ch
10 Feedback Level -64 — +63 Feedback amount
11 FB Level Ofst R -64 — +63 Feedback offset for the R ch
12 Feedback High Damp 0.1 — 1.0 Adjust the high range attenuation (lower values will cause the high range to decay faster)
13 FB Hi Damp Ofst R -0.9 — +0.9 High Damp offset for the R ch
14 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and effect sound
4: NOISY MOD DELAY
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between the dry sound and the effect sound
2 Mod Speed 0 — 127 Delay modulation frequency
3 Mod Wave Type Type-A, Type-B, Type-C, Type-D Modulation type
4 Mod Depth 0 — 127 Modulation depth
5 Delay Time 0.1ms — 650.0ms Delay time
6 Feedback Level -63 — +63 Feedback amount
7 Mod Mix Balance 1 — 127 Balance between delay sound and delay bypass sound
8 EQ High Gain -12dB — +12dB Gain by which the EQ will boost/cut the high range
9 HPF Frequency thru, 20Hz — 8.0kHz Frequency at which the high pass filter will cut the low range
5: NOISE AMBIENT
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance between dry sound and effect sound
2 Mod Speed 0 — 127 Modulation speed
3 Mod Depth 0 — 127 Modulation depth
4 Noise Level 0 — 127 Level of noise component
5 LPF Frequency 1.0kHz — 18.0kHz,thru Frequency at which the low pass filter will cut the high range
6 Dry Mix Level 0 — 127 Pre-delay dry level
7 Delay Time 0.1 — 370.0ms Delay time
8 Delay Time Ofst R 0 — -884 Delay time offset for the R ch
9 Feedback Level -63 — +63 Feedback amount
10 Dry Level 0 — 127 Delay level
11 AM Speed 0.0Hz — 39.70Hz Modulation frequency
12 AM Wave tri,sine,saw up,saw down Modulation waveform selection
13 AM Depth 0 — 127 Depth of amplitude modulation
14 AM Inverse R normal,inverse Invert left/right phase of amplitude modulation signal
… 258 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha A4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha A4000 in the language / languages: English as an attachment in your email.

The manual is 10,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha A4000

Yamaha A4000 User Manual - German - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info