48716
101
Zoom out
Zoom in
Previous page
1/156
Next page
01X Owner’s Manual
Function Tree/Function List
101
Before UsingBasics SectionAppendix Getting StartedReference
b RECALL
For calling up the selected Dynamics effect. The confirmation prompt can be
turned on/off as desired. (See “Recall Confirmation” on page 95.)
Ye s 54
n STORE
Dynamics settings are stored to internal memory in the Dynamics Library. Up
to 88 Dynamics settings can be stored. The confirmation prompt can be turned
on/off as desired. (See “Store Confirmation” on page 95.)
•Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Ye s 65
m CLEAR
This deletes the selected EQ Library.
Ye s
GROUP [INTERNAL] ([SELECTED CHANNEL]) [GROUP]
FADER GROUP/FD-GRP
q
i
(q)
GRP-A/B/C/D
Input Channel or Output Channel faders (the level controls) can be grouped.
There are four (A through D) Channel fader groups. When channel faders are
grouped, operating one of them enables you to control the level of the other
grouped faders while maintaining the relative level differences.
If you add one channel from a pair to a group, the pair partner is automat-
ically added to the group.
•You can also select a channel on another Layer by switching Layers.
•You can temporarily disable a Fader group in order to make adjustments to
individual faders by operating the fader while holding down its [SEL] but-
ton.
No
MUTE GROUP/MT-GRP
q
i
(w)
GRP-E/F/G/H
Input Channel or Output Channel [ON] buttons can be grouped. There are
four (E through H) Channel Mute groups. When channel [ON] buttons are
grouped, pressing any one of them turns the [ON] buttons for all the grouped
channels on or off. A mute group can include On channels and Off channels at
the same time, which turn off or on respectively when you press any one of the
grouped [ON] buttons.
If you add one channel from a pair to a group, the pair partner is automat-
ically added to the group.
•You can also select a channel on another Layer by switching Layers.
If you wish to turn a subset of the grouped channels on or off, first turn
ENABLE (below) off, or remove the channels you wish to turn on or off
from the group.
No
GROUP ENABLE
q
i ENA/---
This parameter enables (ENA) or disables (---) the Groups. When the group is
set to disable (---), the corresponding group is temporarily cancelled.
No
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01X in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info