48716
99
Zoom out
Zoom in
Previous page
1/156
Next page
01X Owner’s Manual
Function Tree/Function List
99
Before UsingBasics SectionAppendix Getting StartedReference
EQ LIBRARY (Common to 4 bands) (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] [EQ LOW])
qr
01 – 200
(Library number)
Determines the Library number. Preset EQ numbers (01 – 40; see page 115)
are indicated by asterisks (*) in the display and cannot be changed.
No 36
zv (Title Edit)
Determines the title (name) of the EQ Library.
No 41
b RECALL
For calling up the selected EQ Library. The confirmation prompt can be
turned on/off as desired. (See “Recall Confirmation” on page 95.)
Ye s 54
n STORE
EQ settings are stored to internal memory in the EQ Library. Up to 160 set-
tings can be stored. The confirmation prompt can be turned on/off as desired.
(See “Store Confirmation” on page 95.)
•Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Ye s 65
m CLEAR
This deletes the selected EQ Library.
Ye s
PAN [INTERNAL] ([SELECTED CHANNEL]) [PAN]
PAN/BALANCE
q
i
(q)
L63 – CENTER – R63
Enables adjustment of the pan setting of the signals routed from the Input
Channels to the Stereo Bus. Pressing the [SEL] button of ST IN channels
repeatedly toggles between the left and right channels, for independent opera-
tion. You can also apply the pan setting to a pair of Bus channels. When the
Stereo Out (ST) is selected, it is used to set the balance.
No !1
RECBUS (REC bus assign)
q
i
(e)
ON/--
When this is set to on, the corresponding input channel signal is sent to the
Rec Bus.
No @1
ST-BUS (Stereo bus assign)
q
i
(r)
ON/--
When this is set to on, the corresponding input channel signal is sent to the
Stereo Bus.
No @1
PHASE
q
i
(t)
NORMAL/REVERS
Switch the corresponding Input Channel phase. NORMAL indicates normal
phase, and REVERS indicates reversed phase. You can set the phase sepa-
rately for ST IN channel L/R or each channel in a channel pair. Pressing the
[SEL] buttons repeatedly toggles between L and R.
No 21 y
ON/OFF (Selected Channel only)
(u) ON/OFF
Determines whether the channel is on or off. The channel is muted with the
Off setting. This works in unison with the [ON] button on the panel.
No o
LEVEL (Selected Channel only)
(i)
-
– +6.0
(BUS/AUX/ST:
-
– +0.0)
Enables adjustment of the input level of the Input Channel signal and the out-
put level of the Output Channel. When the channel knob 8 is pressed, the level
is set to nominal (0dB). This works in unison with the channel fader on the
panel.
No !0
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01X in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info