48716
95
Zoom out
Zoom in
Previous page
1/156
Next page
01X Owner’s Manual
Function Tree/Function List
95
Before UsingBasics SectionAppendix Getting StartedReference
5 mLAN MIDI INFORMATION
z
1 : GENERAL
1 : LOGIC
1 : CUBASE
1 : SONAR
1 : DP (DIGITAL PER-
FORMER)
This page is for display only and the parameters cannot be changed here.
This display shows the settings for each mLAN port. The 01X features five
independent MIDI ports, and the assigned functions are shown here. The set-
tings made in “Remote Select” (page 87) are mirrored here for Port 1, and the
settings made in SHIFT + REMOTE function are mirrored here for Port 5.
1: Remote control of DAW software
2: Direct mLAN connection to MIDI A terminal
3: Direct mLAN connection to MIDI B terminal
4: Data transfer with Studio Manager software
5: SCENE-CTR setting.....For recalling Scenes via program change mes-
sages from an external device, and for transmit-
ting Program Change messages from the 01X
GNRL-RMT .................For remote control of Multi Part Editor software
No
x 2 : MIDI-A No
c 3 : MIDI-B No
v
4 : STUDIO.M
(Studio Manager)
No
b
5 : SCENE-CTR
(Scene Control)
5 : GNRL-RMT
(General-Remote)
No
PREFER (Preference) [UTILITY] Channel knob 7
1STORE/RECALL CONFIRMATION
v
ON/OFF
Determines whether a confirmation prompt is shown or not for the Store and
Recall operations. When this is set to “OFF,” the corresponding operation is
executed immediately without confirmation.
No
, ON/OFF No
2 DIGITAL OUT COPYRIGHT
,
ON/OFF
This setting specifies whether SCMS (Serial Copy Management System) copy
protect data will be enabled (ON) or not (OFF) for the digital signal output
from the DIGITAL STEREO OUT jack. Even if this is set to ON, it will be
possible to digitally record onto a DAT/MD recorder connected to the DIGI-
TAL STEREO OUT jack, but it will not be possible to make second-genera-
tion digital copies.
No
3 DISPLAY SETTINGS
r
PARAM DISP TIME
(Parameter Display
Time)
1 – 5sec
When “Name/Value” (page 17) is set to “NAME,” this determines the amount
of time the currently adjusted parameter value is shown in the display. When
Fader Level Display (below) is set to on, this also determines the time the
Level display is shown.
No 38
,
FADER LEVEL DISP
(Fader Level Display)
Determines whether the Level value is shown or not when a channel fader is
moved.
No 38
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01X in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info