48716
94
Zoom out
Zoom in
Previous page
1/156
Next page
94
Function Tree/Function List
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
MIDI [UTILITY] Channel knob 6
1 STUDIO MANAGER ID
u
1 – 8
Determines the Studio Manager ID. This number must match the Console
Device ID of the Studio Manager (page 9) when transferring the data.
No
2 MIDI CHANNEL
t
TX CH
(Transmit Channel)
1 – 16
Determines the MIDI Transmit channel for transmitting MIDI (program
change) messages.
No 87
y
RX CH
(Receive Channel)
1 – 16
Determines the MIDI Receive channel for receiving MIDI (program change)
messages.
No 87
3PROGRAM CHANGE
b
TX ON/OFF
(Transmit On/Off)
Enables (ON) or disables (OFF) transmission of Program Change messages
from the 01X. (Also see “Program Change Assign Table” below.)
No 87
n
RX ON/OFF
(Receive On/Off)
Enables (ON) or disables (OFF) reception of Program Change messages on
the 01X from an external device. (Also see “Program Change Assign Table”
below.)
No 87
m OMNI ON/OFF
Determines whether program change messages are received over all MIDI
channels or not. (Also see “Program Change Assign Table” below.)
No 87
4PROGRAM CHANGE ASSIGN TABLE
w
PGM (Program Change
Number)
1 – 128
This determines the assignment of program change number to Scene number.
In other words, it allows you to specify which MIDI program change number
(sent via an external device) selects which Scene on the 01X. When a Scene is
recalled on the 01X, the Program Change number assigned to that Scene is
transmitted. Program change messages are sent and received over mLAN Port
5.
Make sure to set the SHIFT + REMOTE function to “NO ASSIGN” when
transmitting/receiving program change data.
Scenes 01 – 99 are assigned by default to program change numbers 1 – 99
in order, and Scene 00 (initial setting) is assigned to program change num-
ber 100.
These program change/Scene number assignments can be stored to exter-
nal devices (such as a computer) by using the included Studio Manager
software.
When the same Scene is assigned to more than one program change num-
ber, the lowest program change number takes precedence.
No 87
r
SCENE
(Scene Number)
NO ASSIGN/00 – 99
No 87
, INIT (Initialize)
Initializes or resets the Scene/Program Change assignments to their default
values.
Ye s
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01X in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info