655217
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Smart Hub 2.0 Mounting
The Smart Hub can be free standing, either vertically or
horizontally on a at surface with access to mains socket
and broadband internet router.
It is also suitable for wall mounting. Using the two holes on
the mounting back plate, mark the position of the holes.
Drill two holes and x with the screws and plugs provided.
Hook the Smart Hub onto the plate.
Check Accessories Range
Find a location where the device is to be mounted, see
section “Location Planning” for suggestions.
Before proceeding to mount the devices physically,
check that the Smart Hub will receive the system radio
transmissions by doing a simple radio range test.
Login to your Yale Home System App. Select
“Controller”, “Device List” then select “Walk Test”.
Hold the devices in the desired location and press the Test/
Learn button (see below) on the accessories.
• KEY PAD: Press button 8 + 9 together for 1 second.
• ALL OTHER DEVICES (Except for the SR-PC SR-PVC
& SR-PS): Hold the device in the desired location and
press the test button for 1 second, the Smart Hub should
respond with a chime.
For the SR-PC, SR-PVC & SR-PS hold the test button for
3 seconds.
If the sensor signal reached the Smart Hub, it will show up
on the last screen (see above).
The radio signal strength is shown by a number under the
device name. This number ranges from 1 to 9 (strongest).
Where possible please ensure devices show 3 or above for
optimal performance.
When you are happy that all your devices can
communicate with the Smart Hub, please proceed to
mounting the accessories
Mounting the PIR & PIR Image/
Video Camera
1. Open the PIR by loosening the bottom screw. Knock
out the relevant holes on the base where the plastic is
thinner. The center 2 knockout holes are for at wall
mounting while the 4 side holes are for corner mounting.
2. Drill holes into the wall using the knockout holes on the
base as a template.
3. Fit wall plugs and secure the PIR base with the screws
provided.
4. Fit the PIR back together and tighten bottom screw, the
PIR installation is complete.
Mounting the Key Pad
1. Knock out the xing holes. Drill holes into the wall using
the xing holes as a template.
2. Fit wall plugs into the wall and x back cover with the
screws provided. Fix front of the Key Pad onto the
back plate.
Mounting Devices
4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yale SR310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yale SR310 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info