655216

Yale SR Series - Smarthome Alarm Manual

17
Zoom out
Zoom in
Previous page
1/20
Next page
17
Troubleshooting
9
External Siren
Siren produces a 3 second alarm
when disarmed
• There has been a previous alarm and there might be an
intruder still in the premises.
Siren produces a series of audible pips when
armed or disarmed
• If the Siren produces a series of pips when arming and
disarming this indicates low batteries.
• If the Siren produces a series of pips only when arming this
indicates a tamper fault. Check that the Siren cover is rmly
secured and the tamper spring on the back of the Siren
is fully depressed when in contact with the wall. If not use
suitable packing material to ll the gap (refer to page 9 for
diagram).
Siren produces an interrupted tone when sounding
an alarm
• The Siren has low batteries. Change batteries with new
alkaline replacements (see page 15).
External Siren
Siren does not respond to Arming or Disarming
• Siren batteries are completely exhausted. See instructions
for changing batteries on page 15.
• Siren not learnt-in. If Siren produces a tamper alarm when
the cover is removed and Siren is OK, learn-in the Siren (see
page 7).
• Siren is not in range of the Smart Hub.
If you experience a problem with adding the
External Siren to you Alarm system
• Ensure the dip switch positions are as shown in the diagram.
If the switches are in the wrong position, please change
accordingly
• After changing the dip switch, turn o the power for 30
seconds, then turn the power on again for the changes to
take eect.
Door/Window Contact
Door/Window Contact LED lights up
• Batteries are low or the tamper switch has been disturbed.
Check that the tamper switch spring is making contact with
the mounting surface. If the tamper switch is OK, please
change the battery (see page 15).
Door/Window Contact does not respond to opening
when jumper is in the test position
• Batteries are completely exhausted. Change battery
(see page 15).
• The magnet is too far away from the Door/Window Contact.
Check that the gap between the Door/Window Contact and
magnet is not greater than 10mm.
PIR Motion Detector
PIR does not respond to motion
• Previous motion has triggered the PIR sleep timer and is
preventing subsequent motion detection. Arm the system
and vacate protected area for at least 90 seconds before
testing. By pressing the learn/test button the PIR LED will
light up and detect motion for the rst minute.
PIR Motion Detector is slow to respond
• This is normal, the PIR Motion Detector has sophisticated
false alarm ltering that will lter out random uctuations and
responds to genuine motion across eld of view, it is less
sensitive walking directly towards it.
PIR Motion Detector gives false alarms
• Check pets have no access to the protected area.
• Check that the PIR Motion Detector is not pointed at sources
of heat or moving objects, e.g. uttering curtains.
• Check that the PIR Motion Detector is not mounted above
convector heaters or pointing directly at windows.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yale SR Series - Smarthome Alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yale SR Series - Smarthome Alarm in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info