478494
106
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL104
The VX-8GR/GE provides a CW learning feature, which sends the designated Morse
Code via the sidetone (heard in the speaker) to help your CW learning.
1. Press and hold the m key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 17: CW
LEARNING.
3. Press the m key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the Training mode (displayed
in fine print at the upper edge of the LCD):
ALPHA: Sends the Alphabet characters
ALPHA AUTO: Sends the Alphabet characters (move to
next character automatically)
NUMBER: Sends the Numeric characters
NUMBER AUTO: Sends the Numeric characters (move to next character automatically)
SYMBL: Sends the Symbol characters
SYMBL AUTO: Sends the Symbol characters (move to next character automatically)
5. Press the b key to change the cursor to “CHR”, then ro-
tate the DIAL knob to select the CW code which you want
to learn.
6. Press the b key to change the cursor to “SPED”, then
rotate the DIAL knob to select the Morse speed. You may
select the units of the code speed in either “CPM (charac-
ters per minute)” orWPM (Words per minute)” using the
DIAL knob from Set Item “FORM”.
7. Press the b key to change the cursor to “REPT”, then
rotate the DIAL knob to select the sending repetition (1 -
9).
8. Press the b key to change the cursor to “PTCH”, then
rotate the DIAL knob to adjust the CW sidetone pitch (400
- 1000 Hz, 50 Hz/step).
9. Press the b key to change the cursor to “LED”, then ro-
tate the DIAL knob to switch the flashing of the (white)
LED light “on” and “off”.
10. Press the f key to begin generating the selected code
characters the designated number of times (Only the speaker
CW sidetone is heard, the radio does not transmit).
11. You may adjust the CW sidetone audio level by rotating the DIAL knob while press-
ing and holding the g key.
12. If one of the “AUTO” modes is not selected in step 4 above, press the f key to send
again, or select another code by rotating the DIAL knob from “CHR” item and press
CW LEARNING FEATURE
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GE in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info