478494

Yaesu VX-8GE Manual

104
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL102
The VX-8GR/GE’s keypad allows easy DTMF dialing for Autopatch, repeater control, or
Internet-link access purposes. Besides numerical digits
[
0
]
through
[
9
]
, the keypad in-
cludes the
[
]
and
[
#
]
digits, plus the
[
A
]
,
[
B
]
,
[
C
]
, and
[
D
]
tones often used for repeater
control.
MANUAL DTMF TONE GENERATION
You can generate DTMF tones during transmission manually.
1. Press the PTT switch to begin transmission.
2. While transmitting, press the desired numbers on the keypad.
3. When you have sent all the digits desired, release the PTT key.
DTMF AUTODIALER
Nine DTMF Autodial memories are provided, allowing you to store telephone numbers
for autopatch use. You can also store short autopatch or Internet-link access code streams
to avoid having to send them manually.
Here is the DTMF Autodial storage procedure:
1. Press and hold the m key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 25: DTMF
SELECT.
3. Press the m key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the DTMF Memory register
(1 - 10) into which you wish to store this DTMF string.
5. Press the M key briefly to begin DTMF Memory entry
into the selected register.
6. Press and hold in the h key for two seconds to clear the
previously-stored data, if desired.
7. Rotate the DIAL knob to select the first digit of the DTMF
string. Selectable entries are 0 - 9, A - D, , and #. You
may select “–” to store a “Pause”, if needed.
8. Press the M key to move to the next character.
9. Repeat steps 7 and 8 to program the remaining DTMF string.
10. Press and hold in the h key for two seconds to delete the
previously-stored data after the cursor.
11. If you make a mistake, press the B key to back-space
the cursor, and enter the correct number.
12. Press the PTT switch briefly to save the new setting and
exit to normal operation. To store other numbers, repeat this
process, using a different DTMF memory register.
DTMF OPERATION
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GE in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info