478494

Yaesu VX-8GE Manual

61
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL 59
HOW TO SKIP
(
OMIT
)
A CHANNEL DURING MEMORY SCAN
As mentioned previously, some continuous-carrier stations like a Weather Broadcast sta-
tion will seriously impede scanner operation if you are using the “Carrier Drop” Scan-
Resume mode, as the incoming signal will not pause long enough for the transceiver to
resume scanning. Such channels may be “Skipped” during scanning, if you like:
1. Recall the Memory Channel to be skipped during scanning.
2. Press the f key, then press the 5 key. The small “”
icon will appear at the left of the frequency display. The
current Memory Channel will now be ignored (skipped) dur-
ing scanning (the “skipped” channel will, of course, still be
accessible via manual channel selection methods using the DIAL knob in the Memory
Recall (“MR”) mode, whether or not it is locked out of the scanning loop).
To re-institute a channel into the scanning loop, press the f key followed by the 5
key twice, to remove the small “” icon from the display.
Note: You may notice a blinking “” icon while you perform above procedure. It indi-
cates the “Preferential Memory Scan” channel, described in the next column.
PREFERENTIAL MEMORY SCAN
The VX-8GR/GE also allows you to set up a “Preferential Scan List” of channels which
you can “flag” within the memory system. These channels are designated by a blinking
“” icon when you have selected them, one by one, for the Preferential Scan List. When
you initiate memory scanning on a channel with the blinking “” icon appended, only
those channels bearing the blinking “” icon will be scanned. If you initiate scanning on
a channel which does not have the blinking “” icon appended, you will scan all channels
including those with the blinking “” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Recall the Memory Channel which you wish to add to the Preferential Scan List.
2. Press the f key followed by the 5 key until a blinking
small “” icon appears at the left of the frequency display.
To clear the memory channel from the “Preferential Scan List”,
press the f key followed by the 5 key. The blinking small
“” icon will disappear from the display.
SCANNING
MEMORY SCANNING
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GE in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info