647896

Yaesu VX-5R Manual

46
Zoom out
Zoom in
Previous page
1/76
Next page
VX-5R OPERATING MANUAL44
LABELING MEMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set mode.
Recall the memory channel on which you wish to append a label.
Press the
[
F/W
]
key, then press the
[
BAND
(
SET
)
AR
]
key, to enter the Menu mode.
Rotate the DIAL to select Menu #03 (“NAME SET”).
Press the
[
BAND
(
SET
)
AR
]
key momentarily to enable programming of the name tag.
Rotate the DIAL to select the first digit of the desired label. When you have made your
selection, press the
[
BAND
(
SET
)
AR
]
key momentarily to move to the next character.
Repeat the previous step to program the remaining letters , numbers, or symbols of the
desired label. A total of eight characters may be used in the creation of a label.
When you have completed the creation of the label, press the PTT key to save the
label and exit.
During “MR” (Memory Recall) operation, press and hold in the
[
2
(
CD
)
TAG
]
key for one
second to activate the alphanumeric Tag. Repeatedly pressing and holding in this key will
toggle operation between “Frequency only” display and “Frequency + Tag” display.
MEMORY OFFSET TUNING
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
With the VX-5R in the “MR” (Memory Recall) mode, select the desired memory chan-
nel.
Now press the
[
MR
(
SKP
)
SC
]
key momentarily. The “MR” indicator will be replaced
by one which says “MT” (“Memory Tuning”).
Rotate the DIAL, as desired, to tune to a new frequency. The synthesizer steps selected
for VFO operation on the current band will be the steps used during Memory Tuning.
If you wish to return to the original memory frequency, press the
[
MR
(
SKP
)
SC
]
key
momentarily. The “MT” indicator will be replaced by “MR”.
If you wish to store a new frequency set during Memory Tuning, just press and hold in
the
[
F/W
]
key for one second, per normal memory storage procedure. The micropro-
cessor will automatically set itself to the next-available clear memory location, and
you then press
[
F/W
]
again to lock in the new frequency.
If you want to replace the original memory contents with those of the new fre-
quency, be sure to rotate the DIAL to the original memory channel number!
Any required CTCSS/DCS changes, or repeater offset modifications, must be
done before storing the data into the new (or original) memory channel location.
Memory Mode
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-5R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-5R in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info