647896
44
Zoom out
Zoom in
Previous page
1/76
Next page
VX-5R OPERATING MANUAL42
The VX-5R provides a wide variety of memory system resources. These include:
¦ 220 “Standard” memory channels, numbered “
11
11
1” through “
220220
220220
220.”
¦ A HOME channel per band, allowing storage and quick recall of one prime fre-
quency on each band.
¦ Ten sets of band-edge memories also known as “Programming Memory Scan”
channels, labeled “
L1L1
L1L1
L1/
U1U1
U1U1
U1” through “
L10L10
L10L10
L10/
U10U10
U10U10
U10”.
¦ Five Memory Groups, labeled “
MG1MG1
MG1MG1
MG1” through “
MG5MG5
MG5MG5
MG5”. Each Memory Group
can be assigned 24 channels from the “standard” memory channel bank.
MEMORY STORAGE
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
Press and hold the
[
F/W
]
key for one second.
ƒ
Within five seconds of releasing the
[
F/W
]
key, rotate the DIAL to select the desired
memory channel. The microprocessor will automatically select the next-available “free”
channel (a memory register on which no data has been stored). If you see an Asterisk
(
ÛÛ
ÛÛ
Û) by any channel number, it means that the channel currently has no data written on
it (i.e. the channel is “free”).
Press the
[
F/W
]
key once more to store the frequency into memory.
You still will be operating in the “VFO” mode, so you may now enter other frequen-
cies, and store them into additional memory locations, by repeating the above process.
STORING INDEPENDENT TRANSMIT FREQUENCIES
(
“ODD SPLITS
)
All memories can store an independent transmit frequency, for operation on repeaters with
non-standard shift. To do this:
Store the receive frequency using the method already described under MEMORY
STORAGE (it doesn’t matter if a repeater offset is active).
Turn to the desired transmit frequency, then press and hold the
[
F/W
]
key for one
second.
ƒ
With in five seconds of releasing the
[
F/W
]
key, rotate the DIAL to select the same
memory channel number as used in step
above.
Press and hold the PTT switch then press the
[
F/W
]
key once more momentarily (this
does not key the transmitter).
Whenever you recall a memory which contains independently-stored trans-
mit and receive frequencies, the “[
++
++
+
][
]” indication will appear in the dis-
play.
Memory Mode
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-5R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-5R in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info