478487
105
Zoom out
Zoom in
Previous page
1/132
Next page
VX-3R OPERATING MANUAL 103
SET
(
MENU
)
M
ODE
The VX-3R Set Mode, already partially discussed in many previous chapters, is easy to
activate and set. The Set Mode is used to configure a wide variety of transceiver param-
eters, some of which have not been detailed previously. Use the following procedure to
activate the Set Mode and adjust the various parameters:
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item to be adjusted.
Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of the
Set Mode Item.
4. Rotate the DIAL knob to adjust or select the parameter to be
changed on the Set Mode Item selected in above step.
5. After completing your selection and adjustment, press the PTT
switch momentarily to save the new setting and exit to normal operation.
Some Set Mode Items (like Set Mode Item 86: TN FRQ) require that the
[TXPO] key be pressed after setting of the parameter, and before exiting to
normal operation.
MASKING THE SET MODE ITEMS
There may be situations where you want to “Mask” Set Mode Items so they are not re-
called during Set Mode Item selection.
1. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item 33:
EXT.MNUEXT.MNU
EXT.MNUEXT.MNU
EXT.MNU.
Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.
3. Press the
[
TXPO
]
key momentarily to enable adjustment of the
Set Mode Item.
4. Rotate the DIAL knob to select “
ONON
ONON
ON”, then press the
[
TXPO
]
key momentarily.
5. Rotate the DIAL knob to select the Set Mode Item to be “Masked”.
6. Press the
[
F/W
]
key momentarily. A small “
X
” icon will appear
above the volume level indicator on the display, indicating the
Set Mode Item is to be Masked.
7. Rotate the DIAL knob; the previously-selected Set Mode Item
will be “Masked”.
8. Repeat steps 5 - 7 above, to append the “
X
” icon to any other Set
Mode Item you wish to “Masked”.
9. Press the PTT switch momentarily to save the new setting and exit to normal operation.
To unmask the hidden Set Mode Item, repeat the above procedure. In step 4 above select
OFFOFF
OFFOFF
OFF” and in step 6 above the “
X
” icon will disappear from the Set Mode Item you wish to
unmask.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-3R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-3R in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info