478483
68
Zoom out
Zoom in
Previous page
1/88
Next page
VX-170 OPERATING MANUAL66
170. This can be particularly useful when configuring a number of transceivers for a public
service operation. Here is the procedure for Cloning one radio’s data to another:
1. Turn both radios off.
2. Connect the user-constructed cloning cable and two optional CT-91 Microphone Adapt-
ers (one on each end) between the MIC/SP jacks of the two radios.
3. Press and hold in the MONI switch (just below the PTT switch) while turning the
radios on. Do this for both radios (the order of switch-on does not matter).
4. Rotate the DIAL knob on each radio to select to “
F6 CLONEF6 CLONE
F6 CLONEF6 CLONE
F6 CLONE,” then press the
[
F
]
key
momentarily.
5. The display will disappear for a moment, then the “
CLONECLONE
CLONECLONE
CLONE
notation will appear on the displays of both radios when the Clone
mode is successfully activated in this step.
6. On the Destination radio, press the MONI switch (“
- - RX - -- - RX - -
- - RX - -- - RX - -
- - RX - -
will appear on the LCD).
7. Press and hold in the PTT switch on the Source radio; “
- - TX - -- - TX - -
- - TX - -- - TX - -
- - TX - -
will appear on the Source radio, and the data from this radio will
be transferred to the other radio.
8. If there is a problem during the cloning process, “
ERRORERROR
ERRORERROR
ERROR” will
be displayed. Check your cable connections and battery voltage,
and try again.
9. If the data transfer is successful, “
CLONECLONE
CLONECLONE
CLONE” will reappear on both
displays. Turn both radios off and disconnect the cloning cable.
You can then turn the radios back on, and begin normal opera-
tion.
The VX-170 Set Mode, already described in parts of many previous
chapters, is easy to activate and set. It may be used for configuration
CLONING
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-170 in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info