478506
9
Zoom out
Zoom in
Previous page
1/20
Next page
Page 7VL-1000 Operating Manual
When using the Grapfical SWR Meter dis-
play, press and hold this switch for ½ second
to change the frequency span of the meter.
11. TUNER Switch
Pressing this switch places the antenna
tuner in the transmit signal path. When the
antenna tuner is activated, the “
TUNERTUNER
TUNERTUNER
TUNER” indi-
cator appears on the display. Press this switch
again to turn off the antenna tuner.
12. TUNE Switch
This switch activates the auto-tune system
manually. Normally, when the operating band
is changed, the tuner will automatically adjust
itself for the same antenna selection and
matching impedance which was set the last
time that band was used. Press this switch to
retune if you are on a different part of the band,
or if the SWR is still too high after automatic
tuning. Manual-restart with this switch can be
used to “force” rematching of the impedance
presented by the antenna system at any time.
13. F SET Switch
Press this switch to activate the exciter and
tune up the VL-1000 automatically when us-
ing the FT-1000MP (with the cable shown on
page 4 connected between the BAND DATA
2 jack on the VL-1000 and R
EMOTE jack on the
FT-1000MP).
14. CONTRAST Knob
This knob used to adjust the LCD contrast.
15. LCD Display
The upper half of the display consists a 320
x 60 dot-matrix display showing operating sta-
tus of the VL-1000, including the Graphical
SWR meter. The lower half contains various
icons representing enabled features.
Front Panel Controls and Switches
7. ANT Switch
This switch can be used for manual selec-
tion of up to four antennas. The antenna se-
lection is stored in memory, so once selected
and matched on a particular band, the same
antenna will be reselected automatically when
recalling that band. One of the indicators “
ANTANT
ANTANT
ANT
11
11
1” to “
ANT 4ANT 4
ANT 4ANT 4
ANT 4” will appear on the display to indi-
cate which antenna is in use.
8. DISPLAY 1 Switch
Press and hold this switch for ½ second to
copy the current display into Display Memory
#1. Press this switch momentarily to recall the
Display Memory 1 data to the display. This
switch is also used for alignment of the ALC
system, if needed.
9. DISPLAY 2 Switch
Press and hold this switch for ½ second to
copy the current display into Display Memory
#2. Press this switch momentarily to recall the
Display Memory 2 data to the display. This
switch is also used for alignment of the ALC
system, if needed.
10. DISPLAY SELECT Switch
This switch is used to select the display
function, with the selections being provided in
the following sequence:
Multi Meter 1

Multi Meter 2

PO Meter 1

PO Meter 2

Graphical SWR Meter

Multi Meter 1

9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VL-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VL-1000 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info