478506
8
Zoom out
Zoom in
Previous page
1/20
Next page
Page 6 VL-1000 Operating Manual
4. LOW Switch
This switch selects the RF output power.
When in the LOW position, the RF output
power will be reduced to (approximately) 500
watts PEP, and “
LOWLOW
LOWLOW
LOW” will appear on the dis-
play.
Note: This switch should be set to the LOW
position when operating from a 100 ~ 117 VAC
power source.
5. INPUT Switch
Press this switch to toggle between the ex-
citers connected to the INPUT 1 and INPUT 2
connectors on the rear panel. The indicator
INPUT 1INPUT 1
INPUT 1INPUT 1
INPUT 1” or “
INPUT 2INPUT 2
INPUT 2INPUT 2
INPUT 2” will appear on the dis-
play to indicate which exciter is in use.
6. ATT Switch
This switch activates a 3 dB input RF power
attenuator, to reduce excessive input power
from the exciter. It should be on if exciter out-
put exceeds 100 watts PEP, as is the case
when using the FT-1000/D. The “
ATTATT
ATTATT
ATT” indica-
tor will appear on the display when this switch
is on.
Front Panel Controls and Switches
1. POWER Switch
This switch turns the VL-1000 on and off.
When the amplifier is turned off, the INPUT 1
jack is connected directly to the ANT 1 jack. If
using a Yaesu transceiver with a B
AND DATA
cable, the VL-1000 AC power will be remotely
controlled by the transceiver’s power switch
when the REMOTE switch on the rear panel
of the VL-1000 is set to ON.
2. OPERATE Switch
Pressing this switch activates the power am-
plifier section of the VL-1000. When the power
amplifier is activated, “
OPERATEOPERATE
OPERATEOPERATE
OPERATE” will appear
on the display. Press this switch again to turn
off the power amplifier section.
3. DIM Switch
This switch selects the brightness level of
the LCD display. In low-light situations, acti-
vating the Dimmer may reduce excess bright-
ness in the display. For normal room lighting,
however, the Dimmer should be set to OFF for
best visibility.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VL-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VL-1000 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info