478471
4
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL2
TIMER PAGE OPERATION
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the
“Timer Page” appears.
2
Press the
[
MODE
]
key repeatedly, until the “Clock” ap-
pears.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio” Page appears.
The transceivers clock is setup from the Set mode item “I01
DATA&TIME ADJUST” in the “TIMER/CLOCK” group.
See page 44 for details.
2
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the
“Timer Page” appears.
2
Press the
[
MODE
]
key repeatedly, until the “Count Up”
timer appears.
The “Count Up” timer has two modes: with Lap function
and without Lap function.
3
Press the
[
SETUP
]
key to set the interval time of the
timer beep: rotate the
[
DIAL
]
knob to select the interval
time, then press the
[
SETUP
]
key.
4
Press the
[
START
]
key to initiate the “Count Up” timer.
5
Press the
[
LAP
]
key to save the lap time, if desired (up to
four laps).
6
Press the
[
STOP
]
key to stop the “Count Up” timer.
7
Press and hold the
[
START
]
key for two seconds to reset
the “Count Up” timer.
When the optional GPS antenna is connected, the average
speed, or the maximum speed of your vehicle may be dis-
played instead of the lap function, by pressing the
[
MODE
]
key again. Press the
[
DISP
]
key to switch between average
and maximum speed.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio” Page appears.
24
6
35
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the
“Timer Page” appears.
2
Press the
[
MODE
]
key repeatedly, until the “Count
Down” timer appears.
The “Count Down” timer has two modes: with Lap func-
tion and without Lap function.
3
Press the
[
SETUP
]
key to set the setup time: rotate the
[
DIAL
]
knob to select the setup time, then press the
[
SETUP
]
key.
4
Press the
[
START
]
key to initiate the “Count Down”
timer.
5
Press the
[
LAP
]
key to save the lap time, if desired (up to
four laps).
6
Press the
[
STOP
]
key to stop the “Count Down” timer.
7
Press and hold the
[
START
]
key for two seconds to reset
the “Count Down” timer.
When the optional GPS antenna is connected, the average
speed, or the maximum speed of your vehicle may be dis-
played instead of the lap function, by pressing the
[
MODE
]
key again. Press the
[
DISP
]
key to switch between average
and maximum speed.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio” Page appears.
24
6
7
35
CLOCK COUNT UP TIMER COUNT DOWN TIMER
1 1 1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info