478471
3
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL 1
FRONT PANEL CONTROLS & SWITCHES
[
PTT
]
KEY
Press this key to transmit.
[
SET
]
(
SET MODE
)
KEY
Press this key to access the Set Mode.
[
F
](
FUNCTION
)
KEY
Press this key to change the current functions of the
[
SMART FUNCTION
]
keys.
[
DIAL
]
KNOB
Rotate this knob to select the operating frequency
(or memory channel) of the right side receiver.
Press and hold this knob for one second to enable
tuning of the VFO frequency in 1 MHz step.
When the right side receiver is set to “Main” band,
press this knob briefly to activates the Band Scope
feature.
When the right side receiver is set to “Sub” band,
press this knob briefly to change the right side
receiver to “Main” band.
While using “Mono” band operating mode:
When the right side receiver is set to “Main” band,
press this knob briefly to activate the Band Scope
feature.
When the right side receiver is set to “Sub” band,
press and hold this knob to toggle “Sub” band
operation “on” and “off”.
[
SMART FUNCTION
]
KEY
These four keys select many of
the most important operating
features of the transceiver.
When changing the operating
function page or pressing the
[
FUNCTION
]
key, the current
function of these keys will
change and the function will
appear above each key.
[
DIAL
]
KNOB
Rotate this knob to select the operating frequency
(or memory channel) of the left side receiver.
Press and hold this knob for one second to enable
tuning of the VFO frequency in 1 MHz step.
When the left side receiver is set to “Main” band,
press this knob briefly to activate the Band Scope
feature.
When the leftside receiver is set to “Sub” band,
press this knob briefly to change the left side re-
ceiver to “Main” band.
While using “Mono” band operating mode:
When the left side receiver is set to “Main” band,
press this knob briefly to activate the Band Scope
feature.
When the left side receiver is set to “Sub” band,
press and hold this knob to toggle “Sub” band op-
eration “on” and “off”.
MICROPHONE
[
B
](
BAND
)
KEY
Press this key to change the Main operating band.
Available bands are:
Left Band: AM Radio, FM Radio, 144 MHz Band,
430 MHz Band, and Audio Line-In
Right Band: 144 MHz Band and 430 MHz Band
You may recall additional operating bands via Set
Mode item “B05: RX EXPANSION”. See page 35.
[
VOL
]
KNOB
Adjusts the right
side receivers
audio volume.
[
VOL
]
KNOB
Adjusts the left
side receivers
audio volume.
[
POWER
]
SWICTH
Press and hold this key for
two seconds to toggle the
transceivers power on and
off.
Press this key briefly while
the transceiver is turned on
to toggle the key lockout
feature on or off.
[
FWD
]
/
[
BCK
](
PAGE
)
KEY
Press these keys briefly to select the operating func-
tion pages.
The available pages are: “Radio” page, “Timer” page,
Baro/Alti” page, “Navigation” page
, and “GPS
Status” page
.
:
Requires optional “FGPS-1” GPS Unit.
Press and hold in these keys to toggle the Dual Re-
ceive feature “on” and “off”.
DIAL
ILLUMINATION
DIAL
ILLUMINATION
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info