674747
120
Zoom out
Zoom in
Previous page
1/140
Next page
Page 118 FT
DX
1200 OPERATING MANUAL
077 DATA MIC GAIN
Function Sets the data input level from the T1C to the
$FS. modulator.
$vailable Values 0CV50 a 100
'efault Setting 0CV5
When this menu is set to “0CV5”, you may adjust the
microphone gain using the front panel [0ICS3((']
knob.
078 DATA OUT LEVEL
Function Sets the $FS. data output level at the output
port pin ) of the 5TTY3.T jack.
$vailable Values 0 a 100
'efault Setting 0
079 DATA VOX GAIN
Function $djusts the “V2;” Gain in the '$T$ mode.
$vailable Values 0 a 100
'efault Setting 0
080 DATA VOX DELEY
Function $djusts the “V2;'elay receiver recovery)
time in the '$T$ mode.
$vailable Values 30 a 3000 msec 10 msecstep)
'efault Setting 300 msec
MODE-FM GROUP
081 FM LCUT FREQ
Function Selects the cutoff freTuency of the lower side
of the 5; audio ¿lter in the F0 mode.
$vailable Values 2FF100 a 1000 H] 0 H]step)
'efault Setting 0
082 FM LCUT SLOPE
Function Selects the ¿lter slope of the lower side of the
5; audio ¿lter in the F0 mode.
$vailable Values 6dBoct 18dBoct
'efault Setting 18dBoct
083 FM HCUT FREQ
Function Selects the cutoff freTuency of the upper side
of the 5; audio ¿lter in the F0 mode.
$vailable Values 2FF700 a 4000 H] 0 H]step)
'efault Setting 2FF
084 FM HCUT SLOPE
Function Selects the ¿lter slope of the upper side of the
5; audio ¿lter in the F0 mode.
$vailable Values 6dBoct 18dBoct
'efault Setting 6dBoct
085 FM MIC GAIN
Function Sets the microphone gain for the F0 mode.
$vailable Values 0CV50 a 100
'efault Setting 0CV5
When this menu is set to “0CV5”, you may adjust the
microphone gain using the front panel [0ICS3((']
knob.
086 FM MIC SEL
Function Selects the microphone to be used on the F0
mode.
$vailable Values F521T '$T$
'efault Setting F521T
F521T Selects the microphone connected to the front
panel 0IC jack while using the F0 mode.
'$T$ Selects the microphone connected to pin 1 of
the 3$C.(T -ack while using the F0 mode.
087 RPT SHIFT (28MHz)
Function Sets the magnitude of the repeater shift on the
8 0H] band.
$vailable Values 0 a 1000 kH] 10 kH]step)
'efault Setting 100 kH]
088 RPT SHIFT (50MHz)
Function Sets the magnitude of the repeater shift on the
0 0H] band.
$vailable Values 0 a 4000 kH] 10 kH]step)
'efault Setting 1000 kH]
089 TONE FREQ
Function Select the desired CTCSS Tone. $ total of 0
standard CTCSS tones are provided see the CTCSS
Tone Chart on 3age 1).
$vailable Values 67.0 a 4.1 H]
'efault Setting 67.0 H]
MENU MODE
120


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info