674747
119
Zoom out
Zoom in
Previous page
1/140
Next page
Page 117FT
DX
1200 OPERATING MANUAL
063 CW BK-IN
Function Sets the CW “break-in” mode.
$vailable Values S(0IFULL
'efault Setting S(0I
S(0I The transceiver will operate in the semi break-in
mode. The delay receiver recovery) time is set
via the 0enu item “
064 CW BK-IN DELAY
”.
FULL The transceiver will operate in the full break-in
QS.) mode.
064 CW BK-IN DELAY
Function $djusts the .eying 'elay receiver recovery)
time on the CW mode.
$vailable Values 30 a 3000 msec 10 msecstep)
'efault Setting 00 msec
065 CW WAVE SHAPE
Function Selects the CW carrier wave-form shape rise
fall times).
$vailable Values 146 msec
'efault Setting 4 msec
066 CW FREQ DISPLAY
Function Selects the freTuency 'isplay Format for the
CW mode.
$vailable Values 'I5(CT F5(Q3ITCH 2FFS(T
'efault Setting 3ITCH 2FFS(T
'I5(CT F5(Q ' isplays the receiver carrier
freTuency, without any offset added.
When changing modes between
SSB and CW, the freTuency display
remains constant.
3ITCH 2FFS(T This freTuency display reflects the
added BF2 offset.
067 PC KEYING
Function (nablesdisables CW keying from the “'$T$
5TTY” terminal pin 3) of the 5TTY'$T$ jack on the
rear panel, while operating on the CW mode.
$vailable Values 2FF21
'efault Setting 2FF
068 QSK
Function Selects the time delay between when the
3TT is keyed and the carrier is transmitted during QS.
operation when using the internal keyer.
$vailable Values 1030 msec
'efault Setting 1 msec
MODE-DATA GROUP
069 DATA MODE
Function Selects the operation mode of the '$T$
mode.
$vailable Values 3S.2TH(5
'efault Setting 3S.
070 PSK TONE
Function Selects the 3S. tone freTuency.
$vailable Values 1000100000 H]
'efault Setting 1000 H]
071 OTHER DISP (SSB)
Function Sets the packet freTuency display offset.
$vailable Values -3000 a 0 a 3000 H] 10 H]step)
'efault 0 H]
072 OTHER SHIFT (SSB)
Function Sets the carrier point during the SSB packet
operation.
$vailable Values -3000 a 0 a 3000 H] 10 H]step)
'efault 1000 H] typical center freTuency for 3S.31,
etc.)
073 DATA LCUT FREQ
Function Selects the cutoff freTuency of the lower side
of the 5; audio ¿lter in the '$T$ mode.
$vailable Values 2FF100 a 1000 H] 0 H]step)
'efault Setting 300
074 DATA LCUT SLOPE
Function Selects the ¿lter slope of the lower side of the
5; audio ¿lter in the '$T$ mode.
$vailable Values 6dBoct 18dBoct
'efault Setting 18dBoct
075 DATA HCUT FREQ
Function Selects the cutoff freTuency of the upper side
of the 5; audio ¿lter in the '$T$ mode.
$vailable Values 2FF700 a 4000 H] 0 H]step)
'efault Setting 3000
076 DATA HCUT SLOPE
Function Selects the ¿lter slope of the upper side of the
5; audio ¿lter in the '$T$ mode.
$vailable Values 6dBoct 18dBoct
'efault Setting 18dBoct
MENU MODE
119


Need help? Post your question in this forum.

Forumrules
1

Forum

yaesu-ftdx1200

Reset search

  • Green Light on VFO A and MEM is flashing and no audio. Even tried Factory Reset and still flashing. How do I fix this? Submitted on 6-12-2022 at 07:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTDX1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTDX1200 in the language / languages: English as an attachment in your email.

The manual is 14,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info