674768
109
Zoom out
Zoom in
Previous page
1/173
Next page
109
Communicating with a Specific Remote Station
Communicating with a Specific Remote Station
Using the Tone Squelch Function
The tone squelch opens the speaker audio only when a signal containing the specified
CTCSS tone is received. Using the digital code squelch (DCS) opens the speaker audio
only when a signal containing the specified DCS code is received. When the tone squelch
function is active, signals from other stations not containing the specified code are not
heard. The receiver will be quiet while waiting for a call from a specific station over a long
period of time.
Cautions
y The tone squelch function does not function in digital mode. Touch [MODE] to switch the
communication mode to AMS (Automatic Mode Select Function) or analog mode in advance.
y The tone squelch function does not function when the APRS baud rate is set on B-band. In Set mode,
select [APRS][4 APRS MODEM], then switch the setting to OFF in advance.
Selecting the Squelch Type
1
Press and hold the key for over one second.
The transceiver enters Set mode.
2 Touch [SIGNALING].
3 Touch [11 SQL TYPE].
4 Rotate the DIAL to select the desired squelch type.
5 Press .
The selected squelch type is set and the transceiver exits from Set mode.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info